Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Franklin, TN
We provide independent HeatShield service across Franklin, TN for both sides of this town’s chimney divide: the tall masonry stacks downtown and the factory-built fireplaces in the newer subdivisions. What sets our HeatShield work apart here is that we diagnose the flue before we recommend anything, because in Franklin the same “my chimney smokes” call can be a cracked clay joint under an 1800s stack or a mis-sized liner behind a 2010s prefab. Goodwin Chimney Sweep is an independent HeatShield service provider, not a dealer or authorized agent. Call (844) 372-0461. We answer 24/7.
Why Franklin Residents Choose Us for HeatShield Service
HeatShield is a cast-in-place lining and resurfacing product, and it only performs as well as the prep underneath it. That’s the part we take seriously. Our technicians have up to 9 years of experience reading flues, and we’ve learned Franklin chimneys ask for judgment calls a generic sweep can’t make.
A single day in Franklin can mean working through a hand-laid masonry stack in the historic downtown core and then a builder-grade metal fireplace out in the 37067/37069 subdivisions. Those two chimneys need entirely different conversations about lining, caps, and draft. We carry the HeatShield product line as working knowledge, not as a sales script, and we pair it with components from DuraFlex, Olympia Chimney, Gelco, Famco, and Copperfield so every repair uses materials built for the trade rather than hardware-store substitutes.
Scheduling is straightforward. You call, we book a sweep or inspection, and we show you what we find with photos before any repair is discussed.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Franklin
Most HeatShield failures we see in Franklin come down to prep, matching, or moisture. Here’s what tends to go wrong.
- Cracked and spalled clay-tile joints downtown. The 19th- and early-20th-century masonry chimneys around the historic core often have clay tile that has cracked or shed joints, letting creosote and moisture work into the brick. HeatShield’s cast-in-place lining can bridge those gaps, but only after the flue is properly cleaned and joints are sound.
- Resurfacing that didn’t bond. Middle Tennessee’s humid summers let chimneys sit idle and take on dampness. HeatShield resurfacing has to be applied to a thoroughly dried and primed flue, and skipping that step is the most common reason a resurfacing job fails early.
- Mismatched lining kits in newer homes. Prefab metal fireplaces in the 37067 and 37069 subdivisions sometimes have flue sizes or offsets that a standard HeatShield kit won’t fit without adaptation. Improper fitting attempts by others cause the trouble we’re called to correct.
- Crown coating over a bad crown. Coating a cracked or poorly prepared crown traps moisture and accelerates spalling in the brick below, which is common on the tall exterior chimneys that catch driving rain here.
- Poor draft that reads as a lining problem. Franklin’s older downtown chimneys often draw weakly once surrounding trees and newer, taller additions change the draft conditions the flue was built around. A sweep call can turn into a draft-diagnosis and relining job.
HeatShield Service in Franklin: What Local Conditions Mean for Your Equipment
The one Franklin fact that shapes HeatShield work here more than anything is the draft problem on the historic downtown blocks. The tall, narrow 1800s chimneys were built to pull against a skyline that no longer exists around them. Mature trees and newer taller additions have altered the airflow these flues depended on, so a chimney that worked fine decades ago now smokes into the room.
That matters for HeatShield specifically. When we’re called for a routine sweep on one of these stacks and find weak draft, we don’t just brush and leave. A Level 2 inspection tells us whether the flue is undersized, cracked, or simply fighting its surroundings. HeatShield’s resurfacing and cast-in-place lining can smooth and seal an unlined or clay-tile flue to restore safe venting, but the right fix depends on reading the draft first. That’s the diagnosis step we never skip in downtown Franklin.
HeatShield Models & Products We Service in Franklin
We handle HeatShield’s core lines for the mix of chimneys Franklin has. The HeatShield Cerfractory Flue Sealant is a cast-in-place lining for clay-tile flues, which fits the older downtown masonry work. The HeatShield Resurfacing System serves unlined masonry chimneys. The HeatShield Insulated Flue Liner Kit covers wood-burning appliances, and HeatShield Crown Coat handles flexible crown repair.
We use HeatShield components and approved accessories for lining and resurfacing work. Where a HeatShield part isn’t available or is cost-prohibitive for a job, we only consider aftermarket equivalents that meet or exceed HeatShield specifications. No guesswork, no substitutions that undercut the repair.
HeatShield Service in Franklin: What Local Conditions Mean for Your Equipment Redux
If you’re in one of the 1990s-2010s subdivisions out toward 37067 or 37069, your HeatShield work usually starts from a different place. Those homes were built with prefab wood-burning fireplaces and gas inserts. Many of them need inspection, a proper cap and screen, and HeatShield Crown Coat more often than they need full relining. When a liner is damaged or poorly sized, the fix is a HeatShield-compatible insulated insert liner rather than a cast-in-place job. That’s the two-track reality of servicing Franklin: same brand, very different application depending on which side of town the chimney sits on.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Franklin
We don’t quote HeatShield lining or resurfacing work over the phone without seeing the flue, because the honest price depends on what’s actually there. A free estimate comes with a Level 2 inspection, photos, and a written scope of work: cleaning, creosote removal, joint prep, then the HeatShield application. The written estimate sets the final price, and nothing is recommended without camera evidence you can see for yourself.
- Sweep and inspection: quoted per job by written estimate
- Creosote removal: quoted per job, scaled to the severity found
- HeatShield cast-in-place lining: quoted per flue after inspection
- HeatShield Crown Coat: quoted per crown after inspection
When work can safely wait, we say so. Call (844) 372-0461 for a free estimate.
Serving Franklin, TN – Our Local Coverage Area
We serve Franklin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Franklin
It can, but only after the masonry is cleaned, dried, and any failed joints are repaired. HeatShield’s Resurfacing System is designed for exactly this: unlined masonry chimneys. We start with a Level 2 inspection to confirm the brick is sound enough to hold a lining. If the masonry is crumbling or widely spalled, we’ll tell you plainly, and a different path may be the right one.
Sometimes, but not always without adaptation. Factory-built fireplaces can have flue sizes or offsets that a standard HeatShield kit won’t fit cleanly, and forcing a fit causes the failures we’re called to fix. We measure before we recommend, and we’ll tell you if your prefab fireplace is better served by a HeatShield-compatible insulated insert liner than by cast-in-place resurfacing.
Humidity is the single biggest threat to a HeatShield job in Middle Tennessee. A flue that sits idle through the damp summer takes on moisture, and HeatShield material won’t bond properly to a wet flue. We dry and prime thoroughly before any application, because skipping that step is the most common reason a HeatShield resurfacing fails early. Call (844) 372-0461 to book an inspection and get the prep right.
It can help only if the crown itself is sound and prepared correctly. Coating a cracked or improperly prepped crown traps moisture and accelerates spalling below, which is a problem we see on the tall exterior chimneys that catch driving rain here. We assess the crown before coating, and we’ll tell you when repair or rebuilding makes more sense. Call (844) 372-0461 for a free estimate.
Yes, via HeatShield’s Insulated Flue Liner Kit, which is designed for wood-burning appliances. The key is proper sizing and installation, which we verify during the inspection. We’re an independent HeatShield service provider, not a dealer or authorized agent, so our recommendation is based on what your appliance actually needs. Call (844) 372-0461 for a quote.
Service Areas Near Franklin
Alongside Franklin, we serve homeowners in Brentwood (see our HeatShield service in Brentwood), in Nolensville, and across Murfreesboro, Woodbury, Shelbyville, Christiana, Smyrna, and La Vergne. If you’re unsure whether we cover your block, call and we’ll confirm. For our full Franklin overview, visit our Franklin service page.
Book Your HeatShield Service in Franklin Today
Whether you’re nursing an unlined 1800s flue downtown or looking after a prefab fireplace out in 37069, we can inspect it, clean it, and tell you plainly whether HeatShield is the right fix. Call (844) 372-0461 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Goodwin Chimney Sweep.