Chimney Repair in Franklin - Camera Evidence Before Any Quote

Fast, Reliable Chimney Repair Across Franklin

Chimney repair in Franklin, TN, usually starts with an inspection that tells the truth about what’s inside the flue. We handle the whole job here: sweep, inspection, and repair under one company, using professional-grade materials from DuraFlex, HeatShield, Gelco, and Copperfield. Our technicians have up to 9 years of experience, and they know the difference between a 19th-century downtown stack and a builder-grade prefab in one of the newer subdivisions. You call (844) 372-0461. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 372-0461

Why Franklin Homeowners Call Goodwin Chimney Sweep for Chimney Repair

Franklin is two chimney markets under one name, and that’s the reason homeowners around here call us. On the older blocks you have tall exterior masonry stacks with several flues, many unlined or fitted with nothing but clay tile. In the eastern and southern subdivisions you have prefab fireplaces and gas inserts that mostly need caps, screens, and flashing service. Few trades see both kinds of work in a single day. Our technicians do, and that changes how we quote a job.

We show you what we find. A Level 2 inspection with video lets you see the cracked tile or the glazed creosote on the camera yourself before anyone recommends a liner. In the historic blocks, mature trees and taller newer additions have changed the original draft conditions, so what starts as a sweep routinely turns into draft diagnosis, crown work, and relining. That’s a repair path most sweep-only companies can’t offer.

From the first sweep to the finished repair, you deal with one company. No referral runaround. Our team is licensed and insured, works with HeatShield resurfacing and DuraFlex and Olympia Chimney liners, and books a flat-price sweep agreed before we arrive.

Chimney Flashing Repair in Franklin

Chimney Flashing Repair in Franklin is usually the job that stops a slow leak before it rots the smoke chamber and damper. Flashing is the metal where the chimney meets the roof, and on both the historic homes and the 1990s-2010s subdivisions it’s the weakest joint on the whole stack. Middle Tennessee’s driving rain works at that seam year after year, and a failed run of flashing lets water track down inside the masonry where nobody sees it. A typical flashing repair in Franklin runs $250-$550, and a full flashing replacement with new counterflashing and sealant runs $450-$900. The written estimate sets the final price.

Roof-line leaks on older masonry

On the downtown blocks, original flashing is often long gone and patched with tar. We pull the old material, check the brick and mortar at the joint, and set new flashing so it sheds water away from the flue rather than into it.

Failed flashing on newer roofs

On subdivision homes the flashing is usually intact but the sealant has failed at the shingle line. That’s a smaller repair, and we say so when it is.

Chimney Crown Repair in Franklin

Chimney Crown Repair in Franklin addresses the concrete cap on top of the stack, and it’s the repair that protects everything below it. A cracked or flat-poured crown lets humid summer air and rain soak into the brick, and that’s what causes spalling and rotted mortar over time. A proper crown gets an overhang and a drip edge so water leaves the chimney instead of sitting on it. Crown repair in Franklin typically runs $400-$850, and rebuilding a badly deteriorated crown runs $700-$1,500. We give you a written estimate before any work starts.

Why flat crowns fail

A crown poured flat with no overhang holds water at the edge of the brick. We rebuild it with a slope and a drip edge so it drains.

Crown work on tall stacks

The tall 1800s chimneys downtown take more setup to reach safely. That’s a trained-professional job, not a ladder-and-caulk project.

Trusted Brands We Service in Franklin

We work with the brands professional chimney contractors specify. HeatShield resurfacing lets us restore a damaged flue without a full liner replacement in the right conditions, which gives Franklin homeowners with original clay-tile flues a repair path most basic sweep companies can’t offer. DuraFlex and Olympia Chimney flexible liners handle the offset and older flues common in the historic blocks. Gelco and Copperfield cover caps, covers, and venting, so the top of the chimney is as protected as the flue itself. We don’t stock parts. We specify the right product for your chimney and get it in.

Common Chimney Repair Problems We See in Franklin Homes

• Multiple flues treated as one chimney. A tall 1800s stack downtown often serves three fireplaces, and one flue gets relined or swept while a second appliance’s flue stays unlined and unaddressed. Each flue needs its own inspection and its own verdict.
• Water intrusion hidden by the off-season. A cracked flat-poured crown and failed flashing rot the smoke chamber and damper before anyone notices. The humid months between fires hide the damage until it’s structural.
• Glazed third-degree creosote mistaken for soot. In a rarely used historic firebox, hardened glazed creosote looks like ordinary buildup. A brush won’t touch it, and a brushing sold where a Level 2 inspection and relining are needed wastes your money.
• Caps and flashing on the newer subdivisions. Prefab fireplaces in 37067 and 37069 mostly need a missing or rusted cap and failed flashing at the roofline, fixed with a cap-and-screen and new flashing rather than a full reline.

Pricing for Chimney Repair in Franklin, TN

We Also Serve Cities Near Franklin

We work with homeowners across the surrounding towns, including Brentwood, Nolensville, La Vergne, and Smyrna. Each has its own mix of older masonry and newer prefab fireplaces, and the repair vocabulary shifts accordingly. If you’re just outside Franklin and want a straight answer about your chimney, reach out. We’ll tell you what we find and what it takes to fix it.

FAQs About Chimney Repair in Franklin