Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Smyrna
If you live in Smyrna and your fireplace has started acting up, you’re in the right place. Our chimney repair team works across Smyrna and the surrounding neighborhoods, and we know exactly what we’re walking into: a lot of newer homes with factory-built fireplaces, prefab metal flues, and gas inserts instead of old brick stacks. That changes how repair works here, and it changes what a qualified technician needs to look for. We answer 24/7 and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 372-0461 for a free estimate.
Why Smyrna Homeowners Call Goodwin Chimney Sweep for Chimney Repair
We handle the whole job under one name: sweep, inspection, and repair. When we find a cracked prefab liner or a cap that’s been beaten up by a spring hail storm, we don’t hand you off to someone else. The same company that inspects your Smyrna chimney is the one that fixes it, and that continuity matters when a problem needs more than cleaning.
Our technicians have up to 9 years of experience, and that experience shows most clearly on newer construction. A Smyrna home built in the 1990s or 2000s doesn’t look tired; the firebox looks clean, the brick veneer looks fine. The problems are inside the chase and up at the cap. Because we’re familiar with the subdivisions and streets across this part of the county, we can get to Smyrna quickly and usually carry enough knowledge of local housing stock to know what we’re likely to find before we climb up.
We use professional-grade chimney industry brands, not hardware-store substitutions. Every inspection is documented, so you see what we see.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Smyrna
Chimney Masonry Repair in Smyrna covers the homes that do still have brick stacks, especially the older small masonry-chimney properties around the downtown core near the town square, and the brick-veneer homes where cracks in the crown or spalling at the shoulder have let water in. Most of that work is repointing joints, replacing spalled brick, rebuilding a failing crown, and sealing the whole thing so water stops getting behind the brick. A typical masonry repair in Smyrna runs $450 to $1,800, with a full rebuild of an upper stack landing higher. The written estimate sets the final price.
Mortar Joints and Tuckpointing
Most brick chimneys here take water through the mortar long before the brick itself fails. We grind out the soft, crumbly joints and repack them with fresh mortar matched to the original color and hardness, so the repair doesn’t crack the older brick around it. Tuckpointing catches a small problem before it turns into a rebuild.
Crown and Flashing Sealing
The crown is the concrete cap on top of a masonry stack, and it’s the first thing to crack in our humid springs and rapid temperature swings. We rebuild or reseal crowns and reset chimney flashing where water is finding its way into the attic or ceiling. Small leaks that wait all winter tend to show up as stained drywall in the spring.
Chimney Cap Installation in Smyrna
Chimney Cap Installation in Smyrna is one of the most common repair calls we take, because the frequent spring hail and wind storms this area gets crush and displace caps on prefab chases. A damaged cap lets rain and snow straight down the flue, which accelerates creosote glazing and rust inside the liner. We fit a properly sized cap or replace a dented one with new components, sealed at the chase. A typical cap installation in Smyrna runs $250 to $550, and the written estimate sets the final price.
Prefab Chases and Manufacturer-Specific Caps
Factory-built fireplaces use caps sized to their own chase dimension, so a generic cap from a home improvement aisle often doesn’t fit correctly or seal. We work with Gelco and Famco components so the cap you get is built for the system it’s protecting.
Why a Sealed Cap Matters on a Newer Home
On a prefab metal flue, water intrusion is the beginning of every other problem: rusted liner walls, separated seams, and a failing firebox. A cap that fits and seals is the single cheapest protection on the system.
Trusted Brands We Service in Smyrna
We work with the brands installed in this part of Middle Tennessee, which means your repair doesn’t stall while someone hunts for parts. DuraFlex and Olympia Chimney flexible liners are the standard answer for older or offset flues that need relining, and we can size and fit them to your existing chase. HeatShield resurfacing gives some chimneys a repair path that avoids a full liner replacement, which is a capability most sweep-only companies don’t offer. For caps and venting work we use Gelco and Famco components. We don’t claim to stock parts locally; we source the right brand-matched component for your system so the job gets done properly the first time.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Smyrna Homes
- Rusted prefab liners. Metal flue liners in 1990s and 2000s Smyrna homes develop rust and seam separations from our humid springs and quick temperature swings. A liner that looks fine from the fireplace opening can be pitted and separated two feet up the chase.
- Failed factory-built inserts. Gas and gas-log inserts with manufacturer-specific parts become hard to repair once the original components go. Getting the exact replacement from the right brand line is what keeps the unit safe and drafting correctly.
- Hail-damaged caps and crushed crowns. Spring storms here knock caps out of position and expose prefab chases to water intrusion. The water then rusts the liner and glazes the creosote further down.
- Gas units mistaken for wood-burning. Many Smyrna fireplaces were installed as vented gas units by builders, and homeowners assume they’re wood-burning for years. Burning wood in a gas-only unit is a serious safety issue, which is why we verify the system type on every inspection.
Pricing for Chimney Repair in Smyrna, TN
We price every job by written estimate, not by a phone guess. For planning, here are typical ranges in the Smyrna market: cap replacement $250 to $550, tuckpointing and mortar repair $450 to $1,200, crown rebuild or flashing repair $400 to $900, waterproofing $300 to $700, and a prefab liner replacement $1,800 to $4,500 depending on length and access. Factory-built firebox component repair often lands between $500 and $1,500. What moves a job up or down is access to the chase, the length of flue involved, and whether brand-specific parts need to be ordered. Our estimate is free, and nothing gets recommended that we can’t show you on camera. Call (844) 372-0461 for an exact quote.
We Also Serve Cities Near Smyrna
We cover Smyrna and the towns around it, including La Vergne, Murfreesboro, Nolensville, and Mount Juliet. If you’re just outside the Smyrna line, call and we’ll confirm coverage. You can see our full Smyrna service area and the surrounding communities we work in.
Serving Smyrna, TN – Our Local Coverage Area
We serve Smyrna and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Smyrna
Yes. A newer home still needs inspection, because factory-built fireplaces and prefab flues fail from moisture and component wear rather than age. The parts inside the chase are original builder-grade components, and a Level 2 inspection is how we confirm the liner and firebox are intact. Call (844) 372-0461 for a free estimate.
Frequent spring hail and wind storms in this area crush and displace caps on prefab chases, and a cap sized for a different system doesn’t hold up. We fit caps matched to your chase dimension using Gelco or Famco components and seal them properly. Call (844) 372-0461 for a free estimate.
It’s very common here. Many Smyrna fireplaces were installed as gas or gas-log inserts by builders in the 1990s and 2000s, and homeowners often don’t know until an inspection. Burning wood in a gas-only unit is unsafe, so we verify the system type first. Call (844) 372-0461 for a free estimate.
You’ll find a mix, but Gelco and Famco components are common on caps and venting, and DuraFlex or Olympia Chimney flexible liners come up when an older flue needs relining. We source the brand-matched part for your specific system. Call (844) 372-0461 for a free estimate.
No, we’re closed on Saturday. We answer 24/7 for calls, and fast dispatch from 7am to 7pm runs Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 372-0461 for a free estimate.
If your Smyrna chimney needs attention, Chimney Repair starts with an inspection you can watch and a written estimate before any work begins. Call (844) 372-0461 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Goodwin Chimney Sweep.