Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Franklin
If your fireplace has gone smoky, your cap looks rusty, or you simply can’t remember the last time the flue was cleaned, we can help. Goodwin Chimney Sweep handles sweeping, inspection, and repair for homeowners across Franklin, from the historic blocks off Main Street to the newer subdivisions off Cool Springs Boulevard and Mack Hatcher Parkway. Local knowledge matters here because Franklin’s chimneys aren’t all the same: an 1840s masonry stack and a 2008 factory-built insert fail in completely different ways. Call (844) 372-0461 to book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Franklin Homeowners Call Goodwin Chimney Sweep for Chimney Sweep
Franklin homeowners tend to be careful about who they let on the roof, and rightly so. We sweep, inspect, and repair under one company, so the person who finds a cracked chase top or a failed damper is the same outfit that fixes it. No handoff to a second contractor, no waiting on a callback.
We work with the same professional-grade brands chimney contractors specify – HeatShield for liner resurfacing, DuraFlex and Olympia Chimney for flexible liner and prefab chase components, Copperfield and Gelco for caps and venting. That matters in Franklin, where a builder-grade fireplace often needs a manufacturer-matched cap and screen rather than whatever fits at the hardware store. Our technicians have up to 9 years of experience, and every inspection is documented with camera photos you can see for yourself. Nothing gets recommended without evidence, and we’ll tell you plainly when work can safely wait.
We serve Franklin as part of our regular Middle Tennessee routes alongside Brentwood and Nolensville, and we’re familiar with the roads, the housing, and the seasonal crunch that hits when the first cold snap arrives.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning in Franklin
Chimney Cleaning in Franklin usually means more than running a brush up a flue, especially in the older homes near downtown where the chimney has been part of the house for a very long time. A standard sweep removes soot and creosote from the firebox, smoke chamber, damper, and flue, then we run a camera to confirm the liner is intact and the draft path is clear. If you burn wood regularly, an annual sweep keeps creosote from building to the point where it can ignite. A typical chimney cleaning in Franklin runs $150 to $300, with the written estimate setting the final price.
What a Standard Sweep Covers
We brush the flue, clear the firebox and smoke shelf, check the damper operation, and inspect the cap and crown from the roof. You get a photo record of what we found, which is useful whether you’re staying put or selling.
When to Book Before the Rush
Middle Tennessee’s mild, humid climate means most Franklin chimneys sit idle for months, and creosote hardens through the shoulder seasons. Book in late summer or early fall, before the first cold week fills the schedule, and you’ll avoid a wait.
Fireplace Cleaning in Franklin
Fireplace Cleaning in Franklin is the job most newer subdivision homeowners actually need. In the 1990s-2010s homes spread through the eastern and southern parts of town, the fireplace is factory-built, and the complaint is usually a smoky draft or a cap that’s rusted through rather than visible soot. That’s because a builder-grade cap and screen corrodes or blows loose over time, letting driving rain and animals into a prefabricated chase, and a damper that no longer seats makes the whole thing worse. A fireplace cleaning in Franklin runs $120 to $250 depending on the appliance and how much glazed creosote has built up.
Factory-Built Fireplaces Need Different Care
A prefab firebox has manufacturer-specific parts, so we pull the spec for your unit before touching the cap, screen, or damper. Generic replacement parts are where draft problems come back.
What to Check Before You Call
Look for rust in the firebox, water stains, a cap that’s missing or bent, or a damper that won’t close flush. Any of those means it’s time for a camera inspection, not just a brushing.
Trusted Brands We Service in Franklin
We install and work with professional chimney industry brands because the materials matter: DuraFlex and Olympia Chimney for flexible liners and prefab chase components, HeatShield for liner resurfacing that can restore a flue without a full replacement, and Gelco, Famco, and Copperfield for caps, covers, and venting. A generic sweep page won’t mention any of these, which is part of why prefab chimneys get mismatched parts and recurring draft problems. We don’t keep parts in stock or on a truck, but we know the specs, we order correctly the first time, and we turn the work around quickly. If you’ve been told your prefab needs a whole new chimney, get a second opinion first.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Franklin Homes
- Assumed-fine prefab fireplaces. A 15-year-old factory-built unit feels new because it isn’t old brick, so the corroded cap, cracked chase top, and stuck damper go unnoticed until water is sitting in the firebox. The fix is usually parts, not a rebuild.
- Generic brushing on a factory-built fireplace. A basic sweep sold on a prefab that actually needs a camera Level 2 inspection and manufacturer-specific parts leaves the underlying draft problem in place. You pay for the sweep and still have smoke.
- Glazed creosote from idle shoulder seasons. Franklin’s long humid stretches let creosote harden into second- and third-degree glaze on prefab fireboxes and smoke chambers. A brush alone won’t touch it.
- Poor draft on tall historic chimneys. On the older downtown blocks, mature trees and later additions have changed the original draft conditions, so a sweep call turns into a draft-diagnosis and crown or relining job.
Pricing for Chimney Sweep in Franklin, TN
Here’s what the work typically runs in Franklin. A standard chimney cleaning is $150 to $300. A fireplace cleaning on a factory-built unit is $120 to $250. A Level 1 inspection is $100 to $200, and a Level 2 camera inspection is $200 to $400. Creosote removal beyond a standard sweep and cap-and-screen replacement are quoted separately once we’ve seen the job.
What moves the number: how much glazed creosote has built up, whether the chase needs repairs, and how accessible the roof is. The estimate is free, and the written estimate sets the final price, so there are no surprises added after the fact. If something can safely wait, we’ll say so.
We Also Serve Cities Near Franklin
We cover the towns around Franklin as part of our regular Middle Tennessee routes, including Brentwood, Nolensville, La Vergne, and Smyrna. The housing is similar, and so are the fixes: prefab inspections, cap and screen work, and liner repairs. If you’re just outside Franklin, call and we’ll confirm coverage. You can also read more about our chimney sweep services and what a visit includes.
Serving Franklin, TN – Our Local Coverage Area
We serve Franklin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Franklin
Yes. A prefab fireplace needs an annual sweep and inspection even though it isn’t old brick, because builder-grade caps corrode, chases crack, and dampers stop seating long before anyone notices soot. The inspection is what catches those problems early. Call (844) 372-0461 to book one, and estimates are free.
The cap and screen assembly, the chase top, and the damper are the first to go. Franklin’s humid summers and driving rain attack a builder-grade cap within a decade or so, letting water into the chase and rust into the firebox. We check all three on every prefab inspection.
You can’t tell by looking from the hearth – only a camera inspection up the flue establishes the degree. First-degree creosote is light and flaky and brushes off; third-degree is glazed and hardened and needs targeted removal. We show you the photos so you can see what we see.
Yes. Cap and screen replacement is standard work we handle on the same visit as a sweep or inspection, using Copperfield and Gelco components sized to your chimney. We confirm the fit against your firebox spec before ordering so it’s right the first time. Call (844) 372-0461 for an exact quote.
Not necessarily. A cracked firebox or damaged chase often calls for targeted repair or a HeatShield liner resurfacing rather than a full replacement, and that’s exactly the kind of judgment a camera inspection is for. We’ll tell you what’s actually failed and what can safely wait. Estimates are free – call (844) 372-0461.
If your Franklin fireplace hasn’t been looked at this year, book a sweep before the fall crunch. Call (844) 372-0461 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Goodwin Chimney Sweep.