Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Murfreesboro?
Chimney cleaning in Murfreesboro typically costs $180 to $320 for a standard sweep of a wood-burning fireplace, and a level-one inspection is usually included in that price. Gas inserts and wood stoves with a single straight flue run a little less, in the $150 to $240 range, while heavy creosote buildup or a flue we have to work harder to reach pushes the number toward $400 or more. Those are estimates for the Rutherford County market in 2026; your written quote sets the final price.
We’re Goodwin Chimney Sweep, and we handle sweeping, inspection, and repair under one company, so a sweep that turns up a cracked crown or a failing liner doesn’t send you hunting for someone else to finish the job. Our technicians have up to 9 years of experience, we’re licensed and insured, and estimates are free. If you’d rather talk it through than read a table, call (844) 372-0461. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- A standard wood fireplace sweep in Murfreesboro runs about $180 to $320, inspection included.
- Expect to pay more for heavy creosote, a wood stove or insert, or a chimney with difficult flue access.
- Annual sweeping is part of the cost of a working fireplace, not optional maintenance.
- If we find liner or crown damage, we can quote the repair on the same visit instead of handing you off.
- Free estimates, upfront pricing, and one crew from sweep to repair.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s how the numbers stack up for Murfreesboro homeowners in 2026. These are typical estimates, not fixed quotes; the final price comes from the written estimate after we see your chimney.
| Service | Typical Estimate | What’s Involved |
|---|---|---|
| Standard chimney sweep (wood-burning fireplace) | $180 – $320 | Brush and vacuum the flue, firebox, smoke chamber, and damper area; clear the debris. |
| Sweep with basic level-one inspection | Usually included above | Visual check of the flue, damper, cap, crown, and flashing while we’re on the roof. |
| Gas insert or gas fireplace service (vented) | $150 – $240 | Clean the vent and firebox, check for blockages and proper draft. |
| Wood stove or free-standing stove sweep | $200 – $350 | Brush the flue run, clean the stovepipe, inspect the connector and thimble. |
| Heavy creosote removal (stage 3 buildup) | $350 – $600+ | Hard glazed creosote takes more time and care to remove safely. |
| Level-two inspection (camera and video) | $250 – $450 | Recorded camera scan of the flue, used before a sale, after a chimney fire, or when a problem is suspected. |
| Cap, crown, or flashing repair | Quoted per job | Protects the top of the chimney from water; priced after we see the damage. |
| Liner resurfacing (HeatShield) | Quoted per job | Restores a clay liner without a full liner replacement in eligible cases. |
| Flexible liner installation (DuraFlex, Olympia Chimney) | Quoted per job | Full liner install for older or offset flues; priced by length and configuration. |
What pushes a sweep toward the top of that range? Three things, mostly. Heavy creosote is the big one. Stage 3, glazed creosote looks like tar and takes real time to remove without damaging the flue, and it’s a genuine fire hazard, so we won’t skip it. Difficult flue access is another: an offset flue, a tight chase, or a chimney cap that’s hard to get to adds labor. The third is what we find while we’re there. A cracked crown, a rusted damper, or a liner that’s worn through needs fixing, and the sweep price doesn’t include that work. We show you what we find, photograph it, and quote the repair before touching anything. You decide.
What Affects Chimney Cleaning & Sweep Pricing in Murfreesboro
Prices aren’t the same everywhere, and Murfreesboro has its own mix of factors. Here’s what moves the number:
- Type of appliance. A standard wood-burning fireplace is the most common and cheapest to sweep. A wood stove or insert with a longer flue run, or a gas appliance that needs different service, changes the labor. Older homes with a fireplace on an addition often have a separate flue, which means more to brush and check.
- Creosote buildup and how long it’s been. Fireplaces that get burned hot and often collect creosote faster. If it’s been more than a year since the last sweep, or you’ve been burning unseasoned wood, the buildup is heavier and the job takes longer. In a humid Middle Tennessee climate, damp wood and slow fires are common, and both leave more residue in the flue.
- Flue size, shape, and access. A straight, round flue is quick to brush. An offset, a rectangular flue, or a chimney with a cap that’s tough to reach adds time. Houses with tall chimneys or steep rooflines take longer to set up safely.
- Whether you need an inspection beyond level one. A basic visual check usually comes with the sweep. A level-two camera inspection costs more but answers the questions a sweep alone can’t, especially before buying or selling a house or after a chimney fire.
- Repairs found during the visit. A missing cap, a cracked crown, or a damaged damper is often the real cost hiding behind a cheap sweep. We quote those separately so the sweep price stays honest.
- How the chimney was built and maintained. Older homes around [[Murfreesboro]] often have clay tile liners that have seen decades of heating and cooling, and some were built with clearances that a modern inspection will flag. A chimney that’s been kept up is cheaper to sweep than one that’s been let go.
One thing we’d flag: a suspiciously cheap sweep is usually cheap for a reason. On a dangerous component like a flue, the sweep is the safety check. We’d rather do the job right and tell you exactly what’s in your chimney than rush a low-ball price and miss something. High-tension components like flue liners and crowns fail silently if nobody looks, so a trained professional is worth the cost.
How to Save on Chimney Cleaning & Sweep Cost in Murfreesboro
You don’t need a discount code to keep chimney costs down. A few habits do the work:
Burn seasoned wood. Fires that burn hot and clean leave less creosote than smoldering ones, and less creosote means a faster, cheaper sweep. Wood with a high moisture content is the biggest culprit behind heavy buildup. If your wood has been stacked and covered for a full season before you burn it, you’ll already be ahead.
Don’t wait until there’s a problem. Annual sweeping is the maintenance that prevents the expensive repair. A small deposit of soot is swept for the base price; a flue packed with glazed creosote costs significantly more because it takes more time and care. Coming off the previous heating season with a clean flue also means you’re not scrambling when the first cold snap in Murfreesboro hits and everyone tries to book at once.
Bundle inspection and repair when you can. If we’re already on your roof for the sweep and we find a worn crown or a loose cap, handling the repair on the same visit saves the setup and access time a separate trip would cost. We work with professional chimney brands like DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield, so the fix gets the right materials rather than a hardware-store patch. That’s also where HeatShield resurfacing can save real money: it restores an eligible clay liner instead of paying for a full liner replacement, a repair path most sweep-only companies can’t offer.
Watch the cap and crown. A missing cap lets in rain, birds, and debris, and a cracked crown lets water into the masonry. Both are far cheaper to fix early than a rebuild. Water damage is slow and steady, and it’s the single most common cause of chimney repairs we quote.
Get a free written estimate. We provide free estimates and upfront pricing, so you know the number before the work starts. Call (844) 372-0461 and we’ll book the sweep. Same-day service is available when the schedule allows.
FAQs – Chimney Cleaning & Sweep Cost in Murfreesboro
How much does a chimney sweep cost in Murfreesboro in 2026?
Expect $180 to $320 for a standard wood-burning fireplace sweep, inspection usually included. Gas inserts and wood stoves run a little lower on the low end, and heavy creosote or difficult flue access pushes it higher. Call (844) 372-0461 for an exact quote. Estimates are free.
How often should I have my chimney cleaned?
Once a year is the standard for an active fireplace, and that’s the sweep schedule that keeps a flue safe. Homes that burn a lot, or burn often, may want a mid-season check. If it’s been more than a year, book the sweep before the next heating season. Call (844) 372-0461 and we’ll get you on the schedule.
Is it cheaper to sweep a gas insert than a wood fireplace?
Yes, usually by $30 to $80, because a vented gas appliance needs less brushing than a wood flue. Gas units still need service to clear dust, spider webs, and blockages that can affect draft. Call (844) 372-0461 for a free estimate on your unit.
Does chimney cleaning cost more if there’s heavy creosote?
It does. Stage 3 glazed creosote can push a sweep to $350 to $600 or more because it takes more time and care to remove safely. It’s also the buildup most likely to cause a chimney fire, which is why we won’t cut corners on it. Call (844) 372-0461. Free estimates, upfront pricing.
Can I get the same-day service for a chimney cleaning in Murfreesboro?
Often, yes. Same-day service is available when the schedule allows. Call (844) 372-0461. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. If your call comes outside dispatch hours, it’s booked into the next opening. Free estimates.
What does a chimney inspection cost, and do I need one?
A level-two camera inspection in Murfreesboro typically runs $250 to $450, on top of the sweep. You need one before buying or selling a house, after a chimney fire, or when a problem is suspected but not visible from the firebox. Call (844) 372-0461 and we’ll tell you what your situation calls for.
If your fireplace is ready to be swept, or you’re not sure when it last was, call us at (844) 372-0461. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. From the first sweep to the finished repair, you deal with one crew, and we show you exactly what we find. Estimates are free, pricing is upfront, and the written estimate sets the final price.
Pricing reflects the Murfreesboro market as of 2026. Goodwin Chimney Sweep offers free estimates – call (844) 372-0461.
Written by the team at Goodwin Chimney Sweep.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eric Ackerman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Alicia Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rosa Vargas