Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Murfreesboro Homeowners Choose DuraFlex Chimney Cleaning
Goodwin Chimney Sweep provides independent DuraFlex chimney cleaning and service in Murfreesboro, and what sets our work apart is that we service flexible stainless liner systems as their own discipline. A DuraFlex smooth-wall liner fails differently than a clay flue, gets swept differently, and gets inspected differently. We read the actual condition of your liner instead of treating it like any other chimney. We’re an independent service provider, not affiliated with or authorized by DuraFlex, which means we can recommend the repair that fits the liner you already have instead of steering you toward a full reline. Call (844) 372-0461. We answer 24/7.
Murfreesboro’s housing stock is a big part of this. A large share of the homes here burn wood as primary or backup heat, and much of the construction dates to the 1990s – 2000s boom when prefab fireplaces became standard. Many of those systems have never been professionally inspected. Add the buyers and renters who inherit a chimney they’ve never seen inside, and Murfreesboro produces a specific kind of DuraFlex call: a liner that was installed to solve a drafting problem now has its own problems.
Why Trust Goodwin Chimney Sweep for Your DuraFlex Chimney Cleaning?
Flexible stainless liners have specific habits. They kink at offsets. They rust under a poorly sealed cap. They pull creosote into traps a standard sweep won’t clear. Our technicians have up to 9 years of experience with these systems and know what each symptom means before we run a camera.
We service DuraFlex liner kits, insulation blankets and wraps, stainless caps and top plates with quality parts that fit the system. When a top plate needs reseating, the wrong generic part leaves a gap that looks sealed. When an insulation wrap tears at an elbow, the missing material creates a hot spot you can’t spot from the firebox. We install and service with DuraFlex-specific components so the existing liner stays compatible.
We also work inside the manufacturer’s design intent. That matters because most DuraFlex liners carry warranties – and improper service, damaged insulation, or mismatched connections can matter to a claim. We document what we find and what we did so your service record holds up. We’re a chimney specialist, not a sweep-only crew, so a problem caught during cleaning gets diagnosed and fixed under the same roof. No referral runaround after the sweep.
That independence matters in this market. Nobody at Goodwin Chimney Sweep is paid by DuraFlex to tell you what the liner needs. You get our read on the actual condition of the metal, the top plate seal, the appliance collar connection, and the insulation, and we put the repair or replacement decision in front of you with photos.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Fix in Murfreesboro
Flexible stainless liners are good systems. They also fail in predictable ways, and knowing those patterns is what separates a real DuraFlex-specific inspection from a quick brush-down. Here are the failures we find on Murfreesboro relines.
- Kinked or pinched liner sections. A flexible liner is corrugated metal pushed down a flue. If it’s shoved past an offset too fast or the run wasn’t planned, it kinks. The kink becomes a creosote and soot trap. A standard sweep brushes past it; the creosote under it never comes out. Left alone, that’s the deepest, hottest part of the accumulation.
- Poorly seated top plate or cap. Middle Tennessee rain finds gaps. A top plate or cap that wasn’t sealed to spec lets water run down the flue and pool against the stainless. Over time you get rust streaks and pitting on the outside of the liner and moisture-driven creosote in the flue. A clean cap and a properly bedded top plate are cheap insurance against a much bigger repair.
- Uneven or torn insulation wrap. Insulation blankets go on unevenly, or tear at offsets and elbows when the liner flexes. A gap in the wrap creates a hot spot and hurts draft, especially in the elbows. A fireplace that drafts badly on the first cold morning is showing this symptom before anything else does.
- Loose or short appliance collar connection. The liner connects to the firebox collar. When that connection is loose or uses a short adapter, creosote drips down onto the smoke chamber and damper area, baking in above where any brush can reach. That’s the creosote smell after a sweep.
- Rust and pitting from repeated moisture. Our humid summers drive moisture and mold issues in unused flues. In a house that sits out the burn season unused, moisture compounds against the stainless. Rust on a flexible liner isn’t automatically fatal, but where it’s pitting through the metal, the liner is on its way out.
If you’re seeing a smoky smell, weak draft, or a fireplace that won’t pull properly, those symptoms point at one of these problems. A camera inspection tells you which one. Then we show you the photos.
DuraFlex Parts & Our Repair-vs-Replace Approach
We don’t stock OEM or genuine DuraFlex parts. We source parts that match your slip-fit and band-clamp system so the liner stays compatible. Generic stainless caps rarely fit the same way. They look installed until the first hard rain.
Our repair-vs-replace call depends on what the metal is telling us:
- Targeted repair when a single connection, top plate, cap, or insulation section is the problem. A damaged top plate or torn wrap is a repair, not a reline.
- Replace the run when the liner is crushed or badly kinked and traps creosote. We say that plainly. We don’t sell you a sweeping schedule for a liner that can’t be cleaned properly.
When a resurfacing path makes more sense than pulling the liner, we have HeatShield capability on our bench. Then you have options. Call (844) 372-0461 to book an inspection.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis. A Level 2 inspection with camera footage of the full liner run. We check the top plate, cap, insulation wrap, and appliance collar connection. You see the images and the notes.
- 2
Creosote removal. We clear the flue and the kink points with tooling sized to a smooth-wall liner, not a clay flue, so we don’t damage the smooth interior surface that makes a DuraFlex liner worth having.
- 3
Repair or install. A targeted fix on a damaged plate, cap, or connection, or a lined replacement run. Top plate, cap, and insulation all get installed to spec on the system’s actual dimensions.
- 4
Test. Draft test and a visual confirmation of the top plate and cap seal. We show you the firebox side and the top side.
- 5
Warranty-safe documentation. A written record of the service, findings, and parts used. You keep it for any warranty history on the DuraFlex system.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Murfreesboro
Our DuraFlex work in Murfreesboro covers the relining side of the business:
- Smooth-wall stainless liners. Servicing and installing smooth-wall flexible liner runs, including sweep tooling matched to the interior surface.
- Flexible stainless liner kits. Complete liner runs for older flues and offset runs that need a flexible system rather than a rigid one.
- Insulation blankets and wrap kits. Installation and re-work for insulated relines where the wrap needs to hold through offsets and elbows.
- Stainless caps and top plates. Replacement and reseating to close the seal at the top of the run.
We service the system you have. We also install replacement runs where the existing liner is past repair.
We Also Service These Brands
We’re not a single-brand shop. Along with DuraFlex liners and components, we handle HeatShield resurfacing and related flue work, and Gelco products for caps, covers, and venting. That matters when the right fix straddles two brands, and it also means a single sweep, inspection, and repair appointment can usually cover the whole chimney system. Our technicians have up to 9 years of experience across these product lines.
FAQs – DuraFlex Chimney Cleaning Service in Murfreesboro
No. We are an independent DuraFlex service provider, not affiliated with, authorized by, or endorsed by DuraFlex. We work on DuraFlex systems because they’re a common flexible liner system, not because the manufacturer sends us work. Independence means we recommend the repair that fits your liner instead of steering you toward a full reline. Call (844) 372-0461 to book a service.
Yes. We source top plates, caps, adapters, and insulation kits that match the DuraFlex system so the components stay compatible. We don’t claim OEM or genuine DuraFlex parts. We choose the fit first, which is what keeps the liner safe and what keeps the system under warranty coverage. Call (844) 372-0461 for a free estimate.
A standard sweep on a flexible liner is usually a few hours. A top plate or cap reseat, or insulation wrap re-work, adds time for the camera run and the top-side work. A full reline is a separate day. Your written estimate sets the scope and the timeline before we start. Call (844) 372-0461 to schedule.
We service and install DuraFlex smooth-wall stainless liners, flexible liner kits, insulation blankets and wrap kits, and stainless caps and top plates – the whole reline assembly from firebox collar to chimney top. Test the system first with a camera inspection so we can tell you which of those actually needs work.
Improper service can. A damaged insulation wrap, a mismatched component, or a bad top plate seal leaves a paper trail in the wrong direction. We service according to the manufacturer’s design intent and give you written documentation of what we found and did so your warranty record is clean. That’s one reason to use a DuraFlex-specific specialist. Call (844) 372-0461 to book an inspection.
A DuraFlex sweep typically costs about the same as a standard chimney sweep, and a camera-equipped Level 2 inspection adds a modest amount on top because the flue run has to be checked end to end. The written estimate you get before we start sets the final price. Call (844) 372-0461 for a free estimate.
Yes. A smooth-wall liner has a smooth interior that needs the right tooling size and technique. The wrong brush can scuff that smooth surface and actually roughen it, which is where creosote grabs. A flexible liner also has offset bends and elbow runs where creosote hides, and those need different attention than a straight clay flue. We clean it as the product it is. Call (844) 372-0461.
Usually because the sweep didn’t reach the creosote trapped at a kink, or the liner-to-appliance connection is short or loose and dripping creosote onto the smoke chamber. A camera inspection confirms which. Call (844) 372-0461 for a free estimate.
In most cases, yes. A top plate is a serviceable component. Replacing and reseating a top plate over an intact liner is a targeted repair, not a reline, and most of these jobs never touch the flue run itself. That’s the case for a proper camera inspection before anyone quotes a reline. Call (844) 372-0461.
No. Surface rust on the stainless – usually the result of moisture driven down the flue by a poorly sealed cap – is manageable. Rust that has pitted through the metal, or rust spreading from a crushed or kinked section, is the case for replacement. The camera tells us which. Call (844) 372-0461 for a free estimate.
It’s the only way to actually see the liner run. A Level 1 visual check stops at the firebox; a Level 2 adds the camera up the full flue and covers the top plate, cap, insulation wrap, and appliance connection. For Murfreesboro homes with a flexible reline installed years ago, this is the inspection to start with. You see what we see. Call (844) 372-0461.
Book Your DuraFlex Service in Murfreesboro, TN
If your DuraFlex liner is older, kinked, or suspect, or you just need a professional sweep who actually understands flexible stainless, we’re the Murfreesboro team for the job. Sweep, inspection, and repair under one company. Call (844) 372-0461. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Goodwin Chimney Sweep.