Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Murfreesboro?
Chimney repair in Murfreesboro typically costs $185 to $6,500 depending on what’s wrong, with most common repairs landing between $350 and $1,800. A crown repair or waterproofing job usually runs $250 to $600, reflashing costs $300 to $800, and a partial or full liner replacement is the big-ticket item at $1,800 to $6,500. The written estimate you get after an inspection sets the final price, and our estimates are free.
We’re Goodwin Chimney Sweep, and chimney repair is one of three services we handle alongside sweeping and inspection. Our technicians have up to 9 years of experience, and we work with the same professional brands contractors specify – DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield – so repairs are done with materials built for the trade. If you’re in Murfreesboro and want a number for your chimney, call (844) 372-0461. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most chimney repairs in Murfreesboro fall between $350 and $1,800.
- Crown, cap, and flashing repairs are the least expensive fixes, usually $200 to $800.
- Liner work is the priciest category, running $1,800 to $6,500 depending on length and liner type.
- HeatShield resurfacing can restore a damaged flue at a fraction of full liner replacement cost – a repair path most sweep-only companies can’t offer.
- Free estimates and a single company handling sweep, inspection, and repair keeps you from paying twice for the same diagnosis.
Chimney Repair Cost Breakdown (2026)
Here’s what the major repair categories run in the Murfreesboro market. These are typical ranges, not quotes – the condition of your chimney, its height, and the materials involved all move the number.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney cap replacement | $150 – $400 | Standard or custom cap, sized to flue, with screen and mounting hardware |
| Crown repair (crack patching) | $250 – $600 | Sealing hairline cracks and rebuilding the crown’s wash surface |
| Full crown rebuild | $500 – $1,200 | Removing a failed crown and casting a new one with proper overhang and bonding |
| Flashing repair or replacement | $300 – $800 | Resetting step flashing or replacing rusted, separated flashing at the roofline |
| Masonry tuckpointing | $400 – $1,500 | Grinding out and repacking deteriorated mortar joints in the stack |
| Waterproofing treatment | $250 – $500 | Vapor-permeable masonry sealer applied to the stack |
| HeatShield resurfacing | $1,200 – $2,800 | Rebuilding a damaged flue interior with a cast refractory liner surface; sloped crown at the top |
| Flexible liner installation (DuraFlex or Olympia) | $1,800 – $5,500 | Full stainless liner with insulation, top plate, and appliance connection; higher on tall or offset flues |
| Firebox repair | $600 – $2,200 | Rebuilding brick and joints inside the firebox |
| Smoke chamber / damper repair | $400 – $1,200 | Damper replacement or parging the smoke chamber to improve draw |
A few things push the number toward the top of a range. Chimney height matters – a two-story stack on a taller Murfreesboro roof means more staging, more time, and more material. Offset flues (the ones that jog to one side inside the chase) are harder to line and take longer than a straight shot. And if the repair is happening after a neglected stretch, you may be looking at tuckpointing and waterproofing plus the liner together, which stacks up. Repairs caught early tend to sit at the low end of each range; repairs put off for a season or two move up fast.
What Affects Chimney Repair Pricing in Murfreesboro
Chimney repair isn’t one job with one price. It’s a category, and the spread between the cheapest fix and the most expensive is wide. Here’s what actually moves the number.
- The height and complexity of the chimney. A straight stack on a single-story ranch is faster to work than a tall or offset flue. Murfreesboro has plenty of older homes with interior offset chases, and those take more time to line properly.
- Whether the flue is sound or shot. A flue with thin but serviceable walls can often be restored with HeatShield resurfacing instead of a full liner. That’s a real cost difference – resurfacing runs $1,200 to $2,800 versus $1,800 to $5,500 for a full flexible liner. We work with HeatShield for exactly this reason: it gives homeowners a repair path that doesn’t require replacing the whole liner when the flue doesn’t need it.
- Material choices. Stainless flexible liners from DuraFlex and Olympia Chimney cost more than a surface repair but solve problems resurfacing can’t reach. Components from Gelco, Famco, and Copperfield – caps, covers, venting – are spec’d for the trade and installed correctly so the top of the chimney protects the flue below.
- How much water damage there is. Murfreesboro gets heavy summer rain and repeated freeze-thaw cycles in winter. Water that gets into cracked masonry does its damage over seasons, so a chimney that’s been leaking for a while usually needs crown work, flashing, and waterproofing together.
- Access and staging. Steep roof pitches, low-hanging tree limbs, and tight side yards add time to any repair. The crew has to get up there safely and get materials up with them.
- Whether it’s caught during a sweep or inspection. Once we’re already on the chimney for a cleaning or inspection, tackling a repair during the same visit saves you the cost of a second trip. From the first sweep to the finished repair, you deal with one crew.
How to Save on Chimney Repair
The most reliable way to keep chimney repair costs down is to catch problems before they compound. A $250 waterproofing treatment now is worth far more than a $5,500 liner down the road. A few practical habits help.
- Get an annual inspection. Inspections catch cracked crowns, thinning flue walls, and early flashing failure while the repair is still cheap. A repair caught at the patching stage is a fraction of a rebuild.
- Address minor cracks promptly. Crown cracks and mortar joints that start small become structural work once water gets behind them. Small fixes have a way of holding their price; deferred ones don’t.
- Waterproof the stack once the masonry is sound. Applying a vapor-permeable sealer after repairs protects the work you just paid for. Murfreesboro’s wet winters make this worth doing.
- Bundle sweep, inspection, and repair. When one company handles all three, a problem found during the sweep gets fixed during the same visit – no calling a second company to diagnose what the first one found.
- Ask for the written estimate in writing before work starts. Our estimates are free, and the written estimate sets the final price. You should know the number before anyone touches the chimney.
- Don’t skip the liner because it’s the expensive line item. A cracked or unlined flue is a fire hazard, and an unsafe liner can affect your homeowner’s insurance and a future home sale. Repairing it correctly the first time is cheaper than a redo.
If you’re not sure what your chimney needs, call (844) 372-0461 for a free estimate. We show you what we find, and we’ll tell you plainly whether it’s a patching job or something bigger.
Is Chimney Repair in Murfreesboro Worth the Cost?
Yes, in almost every case where the chimney is in active use. A clean flue isn’t just maintenance – it’s the difference between a good fire and a house fire. The chimney is a structural and fire-safety system, and repairs that keep it sound protect the rest of the house. Water damage that starts at a crown and creosote that builds in a damaged flue both have expensive downstream consequences. A $400 flashing repair now is cheap compared to the interior water damage a failed flashing can cause.
The one situation where “worth it” gets complicated is an old chimney with widespread masonry failure and a compromised liner, where the total repair approaches the cost of partial rebuilding. In that case, we’ll walk you through both options – what resurfacing or a new liner solves, and what it doesn’t. Sometimes a full repair is the answer. Sometimes it’s a conversation about whether the fireplace is still a feature you want to use. Either way, you get a straight answer, not an upsell.
What Does Chimney Repair Involve?
Most repairs follow the same sequence, whether it’s a small crown patch or a full liner replacement. We inspect first, so the estimate reflects what’s genuinely wrong rather than what we assume. The repair itself usually starts with cleaning the affected area, removing failed material (old mortar, cracked crown, deteriorated liner surface), and rebuilding or resurfacing. For liner work, a flexible stainless liner drops through the flue with insulation and a top plate, connected to the appliance and vented correctly at the top. For HeatShield resurfacing, the existing flue gets a new cast surface applied to the walls and a sloped crown at the top so the flue drains properly.
When the job is done, the top of the chimney gets the same attention as the flue. Caps, covers, and venting from Gelco and Famco keep rain, animals, and debris out so the repair holds. Repairs that stop at the flue but leave the top exposed rarely last.
What Happens When You Call
You call (844) 372-0461, and we answer 24/7. We’ll ask what’s going on, then schedule a dispatch. Fast dispatch, 7am-7pm, Sunday through Friday. Closed Saturday. When the technician arrives, they inspect the chimney, show you what they find, and give you a written estimate before any repair starts. No surprise charges, no vague line items. If it’s a small fix, we’ll tell you. If it’s a larger repair, we’ll walk you through the options, including HeatShield resurfacing if it’s a candidate, or a flexible liner if it’s not. One company, one point of contact, from inspection through repair completion.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Murfreesboro?
Most chimney repairs in Murfreesboro cost between $350 and $1,800, with simple repairs like cap or crown patching at the low end and liner or firebox work at the high end. The full range runs from about $150 for a basic cap to $6,500 for a complete liner replacement with insulation. Call (844) 372-0461 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper – HeatShield resurfacing runs $1,200 to $2,800 versus $1,800 to $5,500 for a full flexible liner installation. Resurfacing works when the flue walls are still structurally sound but the surface is spalling or cracked; a full liner is the right call when the flue is too damaged or unlined. An inspection tells you which category you’re in. Call (844) 372-0461 to schedule one.
How much does a chimney crown repair cost in Murfreesboro?
A crown patch or repair typically costs $250 to $600, while a full crown rebuild runs $500 to $1,200. The difference depends on whether the crown has hairline cracks that can be sealed or has failed enough to need replacement. Call (844) 372-0461 for a free estimate – we’ll tell you which one you need.
How much does chimney flashing repair cost?
Flashing repair in Murfreesboro typically runs $300 to $800, depending on whether the existing flashing can be reset or has to be replaced entirely. Flashing is the most common source of chimney leaks, and it’s one of the more affordable repairs to catch early. Call (844) 372-0461 for a quote.
Can you come today?
Same-day service is often available in Murfreesboro when you call early. We dispatch Sunday through Friday, 7am to 7pm, closed Saturday. Call (844) 372-0461 – we answer 24/7 and can confirm the earliest opening.
Does chimney repair cost more in an emergency?
No. We price per job by the written estimate, and the estimate sets the final price regardless of when the work gets scheduled. What matters is the scope of the repair, not when it happens. Call (844) 372-0461 to get your estimate.
Getting a Repair Estimate for Your Murfreesboro Chimney
If your chimney has a cracked crown, a failing flashing, water coming in, or a flue that’s seen better days, don’t wait for it to get worse. We handle chimney sweep, inspection, and chimney repair under one company, so the crew that finds the problem is the crew that fixes it. Our technicians have up to 9 years of experience and work with DuraFlex, HeatShield, Olympia Chimney, Gelco, Famco, and Copperfield products – the same brands professional contractors specify. Call (844) 372-0461 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We show you what we find, and you decide from there.
Pricing reflects the Murfreesboro market as of 2026. Goodwin Chimney Sweep offers free estimates – call (844) 372-0461.
Written by the team at Goodwin Chimney Sweep.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eric Ackerman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Alicia Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rosa Vargas