Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Murfreesboro, TN
Chimney inspection in Murfreesboro usually starts with a question a homeowner can’t answer alone: what’s actually inside the flue? A large share of homes here still burn wood as a primary or backup heat source, and much of the housing went up during the 1990s and 2000s boom when prefabricated zero-clearance fireplaces became standard. That means the job we see most is not sweeping an old masonry stack. It’s inspecting and servicing metal firebox systems, many of which have never had a professional look since they were installed. Call (844) 372-0461 to book a sweep or inspection. We answer 24/7.
Why Murfreesboro Homes Are Different
Murfreesboro’s housing splits into two problems that need different answers. Around downtown and in the established neighborhoods, you’ll find true masonry chimneys with brick, mortar joints and clay flue tiles that take on water and crack through freeze-thaw swings. Out in the newer subdivisions built from the 1990s through the 2010s, the fireplace is a factory-built metal firebox with a metal flue inside a chase, and the failure points are totally different: a missing cap, a blocked or absent firestop, a chase built tight against spec.
The climate adds its own pressure. Winters get cold enough for regular fireplace use, so creosote builds up season after season. Summers are hot and humid, and an unused flue in that air pulls moisture, which is where mold and drawn creosote problems start. Add the city’s rapid growth, and a lot of homes here changed hands recently. Buyers inherit a chimney system nobody has opened up in years, and renters live with one the landlord has never had looked at. We treat an inspection as the starting point for both.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Murfreesboro Services
Two jobs account for most of the calls we take from Murfreesboro homeowners: a sweep to clear what’s built up in the flue, and a repair when the inspection turns up something that needs fixing. Both happen under one company, so you aren’t sent looking for a second contractor once the problem is found.
Chimney Sweep in Murfreesboro
A sweep here often means something different than people expect. On a masonry chimney, we’re removing creosote from the flue and clearing the smoke chamber. On the prefab fireplaces common in the newer subdivisions, we’re also checking the firebox panels, the damper and the metal flue, because those systems collect creosote differently and a blocked chase changes how the whole thing drafts. The humid summers around Murfreesboro make an unused flue a moisture trap, so a sweep is also the moment to spot corrosion or water staining before it spreads. For the full rundown on what the visit covers, see our chimney sweep page for Murfreesboro.
Chimney Repair in Murfreesboro
Repair in this city usually lands in one of two places: masonry work on the older brick chimneys near downtown, or component and liner work on the metal systems in the suburban subdivisions. Cracked crowns, failed mortar, damaged caps and deteriorated flue tiles are the masonry side. On the prefab side, it’s missing caps, damaged firebox panels and liners that need replacing with a flexible product suited to an offset flue. We work in professional-grade materials rather than hardware-store substitutes, and we’ll tell you plainly when a problem can safely wait. Details are on our chimney repair page for Murfreesboro.
Chimney Inspection in Murfreesboro
Chimney inspection in Murfreesboro is mostly a story about the 1990s and 2000s subdivisions. When prefab factory-built fireplaces went in by the thousand during that building boom, plenty of them were installed against spec or with the chase blocked, and many have never been opened up since. Hot humid summers and cold burning winters here work on those metal systems year-round, so an unseen flue is where the real risk sits. Our Chimney Inspection is a documented assessment, not an upsell: we show you what we find, with photos, and we tell you what can wait.
Fireplace Inspection
Signs you need it
You’ve bought a Murfreesboro home in the last few years and have no record of the fireplace ever being inspected, or the fire smokes back into the room when you light it.
What it costs in Murfreesboro
A fireplace inspection typically runs $99 – $250 depending on the system and how much of it we can access.
How we do it
We examine the firebox, damper, firebox panels and the visible flue from the firebox up, then check the cap, crown and chase from the roof, and photograph anything that fails.
Level 2 Chimney Inspection
Signs you need it
You’re buying or selling a Murfreesboro house, you’ve just moved in, or you’ve had a chimney fire, earthquake-level settling or a liner change since the last look.
What it costs in Murfreesboro
A Level 2 inspection typically costs $150 – $450, higher when a camera run through an offset flue or a tight chase takes longer.
How we do it
We run a camera through the full flue to see the interior of the liner and any offsets, inspect accessible portions of the chimney exterior and attic/roof connections, and hand you a written report with images.
What Chimney Inspection Costs in Murfreesboro
These are typical ranges for the Murfreesboro market. The written estimate you get after we’ve seen the system sets the final price, and if we find nothing that needs work, we’ll say so.
| Item | Typical range in Murfreesboro |
|---|---|
| Fireplace inspection | $99 – $250 |
| Level 2 chimney inspection (camera) | $150 – $450 |
| Chimney sweep plus inspection | $180 – $400 |
Can a chimney inspection find problems a sweep would miss?
Yes. A sweep clears creosote; an inspection looks at the liner, firestop, cap and chase, and a camera run inside a metal flue can reveal gaps or blockages a brush never touches. In Murfreesboro’s prefab systems, that’s often where the real issue is.
Do I need a Level 2 inspection if I just bought my Murfreesboro house?
It’s the right call. A home inspection rarely covers the inside of a chimney, and many Murfreesboro prefab fireplaces have never been professionally checked. A Level 2 gives you a documented baseline before you burn. Call (844) 372-0461 for an exact quote.
Brands We Service in Murfreesboro
We work with professional chimney industry brands – DuraFlex and Olympia Chimney for flexible liner work, HeatShield for resurfacing, Copperfield and Gelco for caps and venting components – so repairs are done with materials built for the trade. Turnaround depends on the parts needed for your system. See our brands for the full list.
Pricing for Chimney Company in Murfreesboro, TN
| Service | Typical range in Murfreesboro |
|---|---|
| Fireplace inspection | $99 – $250 |
| Level 2 chimney inspection (camera) | $150 – $450 |
| Chimney sweep plus inspection | $180 – $400 |
| Chimney sweep (standard) | $150 – $350 |
| Chimney cap installation | $150 – $450 |
| Crown repair | $300 – $900 |
| Chimney relining (flexible liner) | $1,800 – $4,500 |
| HeatShield resurfacing | $1,200 – $3,000 |
| Masonry tuckpointing | $400 – $1,500 |
Price climbs in Murfreesboro when a prefab chase is blocked and access takes longer, when a metal flue has an offset that complicates a camera run or a liner install, and when masonry near downtown needs real repointing rather than a patch. Everything is priced per job from a written estimate you agree to before we start, and nothing gets recommended without camera evidence you can see for yourself.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Murfreesboro
We work across Murfreesboro, from the older brick homes near the downtown square out to the subdivisions that ring the city. The mix of masonry and prefab systems means the visit changes block to block, so we scope each job by what’s actually there. Response for a booked sweep or inspection is consistent across the city; the timing depends on the schedule you pick, not on which side of town you’re on.
- Downtown Murfreesboro and the older brick neighborhoods
- Blackman and the west-side subdivisions
- Northfield and the north Murfreesboro growth corridor
- Siegel and the newer east-side builds
- Historic homes along the old residential streets near the square
Service Area – Cities Near Murfreesboro
We also book work in the communities around Murfreesboro, and the same housing and climate conditions follow us out there. If you’re just outside the city line, we can schedule you in the same way. Nearby areas we cover include Smyrna, TN, Christiana, TN, La Vergne, TN and Nolensville, TN. Call (844) 372-0461 and we’ll confirm coverage and book a visit.
Serving Murfreesboro, TN – Our Local Coverage Area
We serve Murfreesboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Murfreesboro
We book Murfreesboro jobs into the next available opening, Sunday through Friday, 7am to 7pm. Same-day work is often possible on a booked job. Call (844) 372-0461; we answer 24/7.
It depends on the job and your subdivision’s rules. Structural work, a liner change or a rebuild may need a permit from the city, and some HOAs restrict exterior changes like caps or chase modifications. Ask your city’s building department and your HOA before work starts.
Yes. We work throughout Murfreesboro and in the surrounding communities, including Smyrna, Christiana, La Vergne and Nolensville. Call (844) 372-0461 to confirm your address and book a sweep, inspection or repair.
Get Your Chimney Checked in Murfreesboro
Whether it’s a prefab fireplace that’s never been opened up or a brick chimney near the square that needs mortar attention, the starting point is the same: a documented inspection and a written estimate before any work. Call (844) 372-0461 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murfreesboro Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eric Ackerman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Alicia Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rosa Vargas