Chimney Sweep in Murfreesboro - Flat-Price Sweep, Photo Report Included

Trusted Chimney Sweep for Murfreesboro Homeowners

A fireplace that draws poorly, smells smoky when it’s cold out, or hasn’t been swept in a few seasons is the reason most people in Murfreesboro call us. Creosote builds up quietly inside the flue, and the longer it sits, the harder it is to remove and the more it matters. Our technicians have up to 9 years of experience, and every visit starts with a camera inspection so you see what we see before anyone recommends a thing. We handle sweep, inspection, and repair under one company, which means you don’t get handed off when the sweep turns up a problem. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Call (844) 372-0461 to book your sweep.

Call (844) 372-0461

Chimney Sweep Services

Chimney Sweep Services cover the full job: brushing the flue, clearing the firebox, checking the cap and crown, and documenting what we find with photos. You need it when you burn wood regularly, when it’s been more than a season since the last cleaning, or when smoke backs into the room instead of going up. Goodwin Chimney Sweep brings the same professional-grade materials the trade specifies, including Copperfield caps and Gelco components, so the work at the top of the chimney matches the work inside it. A typical sweep in Murfreesboro runs $150-$290 depending on flue condition and how much creosote has built up. The written estimate sets the final price, and the estimate itself is free.

Chimney Cleaning

Chimney Cleaning is the deeper version of a routine sweep, and it’s what we recommend for a flue that’s been neglected or run hard through several winters. Cleaning addresses glazed, baked-on creosote that a light brushing won’t touch, along with soot staining on the smoke chamber. If you’ve moved into a Murfreesboro home with a fireplace you’ve never used, this is the first call to make before you light a fire. We use the brands professional chimney contractors work with, including DuraFlex liners when a flue needs relining. Chimney cleaning in Murfreesboro typically runs $180-$340 depending on the degree of buildup and flue access. You’ll get a written estimate before we start, so the number doesn’t move.

Third-Degree Creosote and What It Means

Glazed creosote looks like a hard, shiny glaze on the flue walls and doesn’t come off with a standard brush. It’s the stage that matters most for chimney fire risk, and it’s why we inspect before we quote. Removing it takes more time and sometimes a chemical treatment, which is reflected in the price range.

Cleaning After a Long Gap Between Fires

A chimney that sat unused for years collects debris, nests, and moisture damage on top of old soot. We check for blockages before anything else, since a blocked flue sends smoke and carbon monoxide into the house instead of up and out.

Fireplace Cleaning

Fireplace Cleaning focuses on the firebox, hearth, glass, and the surfaces you actually see and touch, separate from the flue work above. It’s the right service when the firebox is caked with ash and soot, when the glass doors have gone cloudy, or when you’re preparing the fireplace for the season and want the whole thing looking right. We clean the firebox walls, clear ash from the base, wipe down the hearth, and check that the damper opens and closes freely. Fireplace cleaning in Murfreesboro generally runs $120-$220 depending on firebox size and how much soot has built up. As with every job, the written estimate sets the final price before we begin.

Glass Doors and Screen Care

Glass doors haze over from smoke and unburned particles, and standard cleaner won’t cut it. We use products made for fireplace glass so you get a clear view without scratching the surface.

Ash Removal and Disposal

We clear the ash bed and take it away, leaving you a clean firebox ready for the next fire. Ash left too deep smothers the draft and shortens the life of the firebox floor.

Chimney Services

Chimney Services at Goodwin Chimney Sweep means sweep, inspection, and repair handled by the same company, not three separate calls to three separate outfits. You need the full range when a sweep uncovers a problem the sweep crew can’t fix, which is the frustration most homeowners describe after working with a sweep-only operator. We work with professional brands including HeatShield for resurfacing and Olympia Chimney for flexible liner work, so the repair path exists in the same visit. Sweep and inspection pricing in Murfreesboro starts around $150 and runs to $340 for heavier cleaning, with repair costs quoted separately by written estimate. Nothing is recommended without camera evidence you can review yourself.

Chimney Sweep Certified

Chimney Sweep Certified means the technician doing the work has been trained and tested on inspection and sweeping standards, not just handed a brush. It matters because a certified sweep knows what a normal flue looks like and what a failing one looks like, and can tell the difference between cosmetic wear and a real hazard. When you’re comparing companies in Murfreesboro, ask what certification the technician holds and whether the inspection follows a recognized standard. Our technicians have up to 9 years of experience and work to industry inspection standards on every job. Certified-level sweep and inspection in Murfreesboro typically runs $150-$340 depending on the scope, with the written estimate setting the final number.

What Certification Actually Covers

Certification covers flue evaluation, venting knowledge, and how to document findings so they hold up. It’s the difference between a guess and an assessment you can act on.

Questions Worth Asking Any Sweep

Ask whether they inspect with a camera, whether they provide photos, and whether they can perform the repair if one is needed. A company that only sweeps will hand you off, and that’s where the runaround starts.

Gas Fireplace Cleaning

Gas Fireplace Cleaning handles the parts a wood-fire sweep never touches: the burner, logs or media, glass, and the venting that carries exhaust out of the house. It’s needed when the flames burn unevenly, when the glass clouds up, when you smell gas near the unit, or when the fireplace hasn’t been serviced in a few years. We clean the burner and media, clear the venting, check the cap and termination, and inspect for anything that could affect safe operation. Gas fireplace cleaning in Murfreesboro usually runs $140-$260 depending on the unit and how much buildup there is. If anything about the gas line itself looks off, we stop and tell you to have a licensed gas professional look at it before the fireplace is used again.

Why Gas Units Still Need Attention

Gas fireplaces produce less creosote than wood, but they still collect dust, pet hair, and debris in the burner and venting. That buildup affects flame quality and, in a blocked vent, can put exhaust where it shouldn’t go.

Venting and Cap Checks

We check the termination and cap for nests, debris, and corrosion. A clear vent is what keeps the exhaust moving out instead of lingering in the room.

Chimney Maintenance

Chimney Maintenance is the yearly habit that keeps a sweep cheap and a repair from becoming a rebuild: an annual inspection, a cleaning when the buildup calls for it, and small fixes handled before they spread. It’s for anyone who burns wood or runs a gas insert and wants the chimney to stay sound through Tennessee’s wet winters and humid summers, which are hard on mortar and crowns. We check the crown, cap, flashing, and flue, and we tell you plainly when work can safely wait another season. Maintenance-level sweep and inspection in Murfreesboro typically runs $150-$290. The written estimate is free, and it’s the only number that matters once we’ve seen the flue.

Water Damage and the Crown

Murfreesboro’s freeze-and-thaw cycles open small cracks in the crown, and water gets in and freezes. Sealing a small crack now costs far less than rebuilding the crown later.

How Often to Schedule

Most wood-burning chimneys want a sweep once a year, or more often with heavy use. Gas units want an annual check even though there’s no creosote to speak of.

Brands We Service

We install and work with professional chimney industry brands, which matters because the materials determine how long a repair lasts. DuraFlex flexible liners are what we reach for on older or offset flues, where a rigid liner won’t make the bends. Olympia Chimney products cover flexible liner installations for the same kind of challenging flue geometry, and we know where those liners wear and how to fit them so they stay put.

HeatShield resurfacing lets us restore a damaged flue without a full liner replacement in the right conditions, a repair path most sweep companies can’t offer. Gelco and Copperfield components handle caps, covers, and venting, so the top of the chimney is protected as well as the flue. Whether you have DuraFlex, HeatShield, Gelco, Copperfield, Olympia Chimney, or any other make, we can help.

Signs You Need a Pro Right Now

• Smoke backing into the room. A fireplace that smokes when you light it usually has a blockage or a draft problem. It’s worth stopping until someone looks at the flue.
• A strong, sharp smell from the fireplace. That odor often means creosote buildup or moisture in the chimney. Either one needs a look before the next fire.
• Dark staining on the chimney exterior or ceiling near it. Staining points to a leak or a venting problem. Water and creosote together are the conditions that damage masonry.
• Visible cracks in the masonry, crown, or flue tiles. Cracks let heat reach materials that weren’t built for it. This is a repair question, not a wait-and-see one.
• It’s been more than a year since the last sweep. Creosote accumulates with every fire, and a yearly sweep keeps it from reaching the stage that’s hard to remove. Call (844) 372-0461 and we’ll book you in.

Our Process, Step by Step

1. 1
   We talk through the fireplace first. What you burn, how often, and what you’ve noticed. That conversation shapes what we look for and saves you paying for work the chimney doesn’t need.
2. 2
   We lay down protection and set up. Drop cloths go down around the hearth before any equipment comes in, and we seal the opening so soot stays in the flue, not in your living room.
3. 3
   We run a camera inspection. A camera shows the inside of the flue from top to bottom, and you see the footage as we go. This is where we find cracked tiles, gaps, or heavy creosote before the brush goes in.
4. 4
   We sweep and clean. The flue gets brushed, the firebox and smoke shelf get cleared, and the cap and crown get checked while we’re up top.
5. 5
   We show you what we found and what it means. Photos, a plain summary, and a written estimate for anything that needs repair. If it can wait, we say so.

How Much Does Chimney Sweep Cost in Murfreesboro?

Our Service Area Near Murfreesboro

We work with homeowners throughout Murfreesboro and the towns around it, including Christiana, Smyrna, La Vergne, Nolensville, Woodbury, and Shelbyville. If you’re toward Brentwood, Franklin, or Mount Juliet, the same scheduling applies. Sweeps in Murfreesboro are booked into the next opening, with fast dispatch from 7am to 7pm, Sunday through Friday. You can book a Goodwin Chimney Sweep visit, or schedule a chimney sweep in Woodbury, a chimney sweep in Shelbyville, or a chimney sweep closer to town.

Frequently Asked Questions About Chimney Sweep in Murfreesboro

Schedule Your Chimney Sweep Service in Murfreesboro Today

Book a sweep and inspection with Goodwin Chimney Sweep and you’ll know exactly what your flue looks like, what it needs, and what it costs before anyone starts work. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. Call (844) 372-0461 for a free, no-obligation estimate in Murfreesboro.

Written by the team at Goodwin Chimney Sweep.