Chimney Repair in Murfreesboro - Camera Evidence Before Any Quote

Trusted Chimney Repair for Murfreesboro Homeowners

Most chimney problems in Murfreesboro announce themselves quietly: a stain spreading across the ceiling near the chase, a puff of smoke that rolls into the room when the fire catches, a cap that disappeared in a spring windstorm. Our technicians have up to 9 years of experience, and we handle sweeping, inspection, and repair under one company, so the person who finds the problem is the person who can fix it. We work with professional-grade trade brands like Copperfield, DuraFlex, and HeatShield rather than hardware-store substitutes. When a repair can’t wait, same-day service is often possible. Call (844) 372-0461. We answer 24/7, with fast dispatch from 7am to 7pm.

Call (844) 372-0461

Chimney Cap Installation

Chimney Cap Installation is the fitting of a screened cover over the flue opening to keep rain, birds, squirrels, and sparks out of the chimney. Any open flue needs one. In Murfreesboro, where summer downpours and winter ice come and go, an uncapped flue takes water straight down the inside of the chimney, and that water works on the liner and the masonry around it. We install caps from Copperfield and Gelco in stainless and powder-coated steel, sized to the flue rather than guessed at, and we set the screen so it doesn’t clog with creosote flake. Installation generally runs $150 to $450 depending on the flue count, the cap style, and how much work the crown needs before it will hold the legs.

Sizing the Cap to the Flue

A cap that’s too small rattles loose in wind. A cap that’s too large lets rain blow in under the edge. We measure the actual flue tile, then order a cap built to those dimensions instead of forcing a stock size onto it.

Multi-Flue and Custom Caps

Homes with two or three flues sharing one crown need a single cap built to span all of them, or individual caps set far enough apart to draft cleanly. We can fit either arrangement. Custom work takes longer to order, but it fits the first time.

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a failed or missing cap and the fitting of a new one in its place. Old caps rust through from the inside out, and the first sign is usually a streak of rust on the crown or a screen that sags into the flue. Storm damage is common around Murfreesboro, and a cap that came loose can leave the flue wide open for weeks before anyone looks up. We pull the old cap, check the crown and the top of the flue for damage it may have caused, and set a new Copperfield or Gelco cap with proper anchoring. Most replacements run $150 to $450. If the crown needs patching at the same time, that’s priced into the written estimate before we book.

Recognizing a Cap That Has Failed

Rust holes, bent screens, and caps that shift when you touch them from below are all failures. A cap that has lost its screen is worse than no cap in some ways, because birds and debris still get in and nest.

When Replacement Beats Repair

A single loose fastener is worth tightening. Once the metal is thin or the screen is torn, replacement costs less than the damage an open flue invites. We’ll tell you which side of that line yours is on.

Chimney Liner Installation

Chimney Liner Installation means fitting a new flue lining inside the chimney so combustion gases leave the house through a sealed, correctly sized passage. Old clay tiles crack from chimney fires and from the freeze-thaw swings that hit Middle Tennessee masonry. Gas appliances also need a properly sized liner, because an oversized flue cools the exhaust and lets corrosive moisture condense where it can eat at the chimney. We install DuraFlex flexible liners, which thread down older chimneys and around offset flues where rigid pipe won’t pass. A typical liner installation runs $2,200 to $5,500 depending on height, flue count, and whether the top needs rebuilding first. HeatShield resurfacing can sometimes restore a liner at lower cost, and we’ll say so if your flue qualifies.

Flexible Liners for Offset Flues

Many older Murfreesboro homes have a chimney that jogs around an interior wall. A flexible DuraFlex liner follows that offset instead of requiring the masonry to be opened. That’s a different job from what sweep-only operators can offer.

HeatShield Resurfacing

HeatShield is a repair method that smooths and restores the inside of a damaged clay flue rather than replacing the whole liner. It’s worth asking about when the damage is localized. We measure first and tell you plainly whether it applies to your chimney.

Chimney Flashing Repair

Chimney Flashing Repair is the correction of the metal seal where the chimney passes through the roof, the joint most often responsible for leaks that show up as ceiling stains far from the chimney itself. Flashing pulls loose as a roof settles, and the tar or caulk some installers smear over it fails within a season or two. In Murfreesboro, a hard rain driven sideways finds every gap in that joint. We rebuild flashing with proper step and counter flashing, set into the mortar joints instead of glued to the surface, so water runs away from the chimney rather than into it. Most flashing repairs run $350 to $900 depending on roof pitch, access, and whether the roof around the chimney needs repair too.

Leaks That Point Elsewhere

Water that appears on a ceiling or runs down the outside of the firebox often enters at the flashing, not at the crown. Tracing the path takes a careful eye on a rainy day or a controlled water test.

Why Caulk Fails at the Roof Joint

Caulk and roof cement crack as the chimney and roof expand at different rates. Metal flashing set into the masonry moves with the house instead of fighting it. That’s the difference between a fix and a seasonal patch.

Chimney Crown Repair

Chimney Crown Repair is the repair or rebuilding of the concrete cap at the very top of the chimney, the surface that sheds water away from the flue. A cracked crown is an open door for water, and water in a chimney is what starts masonry spalling, liner damage, and rusted dampers. Middle Tennessee’s freeze-thaw cycle widens small cracks year after year, so a hairline fracture one spring can be a crumbling crown by the next. We repair crowns with a proper mortar mix, sloping the surface so water runs off the edges, and we rebuild badly deteriorated crowns rather than skim them. Typical crown repair runs $300 to $800, and a full rebuild sits at the higher end of that range.

Cracks and Spalling

Hairline cracks widen with each freeze. Spalling, where the surface flakes away in chunks, means the concrete has already absorbed water and failed. Both are worth repairing before winter.

Rebuilding the Crown

When more than a third of the crown is damaged, rebuilding is usually the better value than repeated patching. We form a new crown with the slope and overhang that let it shed water properly.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they actually do, and the difference matters when the problem turns out to be structural. A sweep-only crew can clean a flue but often has to hand off a cracked crown or a failed liner to someone else, which means a second visit, a second diagnosis, and sometimes a second opinion on whether the repair is needed at all. We handle sweep, inspection, and repair under one company, so the assessment and the fix come from the same place. We also include a camera inspection and photo report with our work, so you see what we see. A full repair visit typically runs $250 to $1,200 for common problems, with liner work higher. The written estimate sets the final price.

Reading Reviews Carefully

Look for reviews that describe the specific problem and the outcome, not just a friendly technician. A pattern of complaints about surprise charges or work that didn’t hold says more than a wall of stars.

Questions to Ask Before Booking

Ask whether they do their own repairs or subcontract them, whether a camera inspection is included, and whether the estimate is written. A company that answers all three plainly is usually the one to hire.

Chimney Masonry Repair

Chimney Masonry Repair is the rebuilding of the brick and mortar that make up the chimney itself, from repointing loose joints to replacing brick that has crumbled or gone soft. Murfreesboro’s climate is hard on masonry: summer heat expands it, winter ice works into the joints, and water that gets in behind a bad crown or failed flashing pushes the whole process along. You’ll see it first as sandy grit on the roof, then as missing mortar, then as brick that flakes when you press it. We repoint joints, replace damaged brick, and rebuild sections that have gone too far. Typical masonry repair runs $500 to $2,500 depending on how much of the chimney is involved. Anything structural gets flagged in the written report before we quote it.

Repointing vs. Rebuilding

Repointing replaces the mortar between sound brick and is the cheaper path when the brick itself is intact. Rebuilding is needed when the brick has gone soft or the chimney has lost its bond.

Water Damage and Spalling Brick

Brick that has absorbed water through a failed crown or flashing will spall and crumble as that water freezes. Fixing the source matters as much as replacing the damaged units.

Brands We Service

We work with Copperfield components for caps and venting, and we know how those caps anchor to a sloped crown and where the screens tend to clog. DuraFlex flexible liners are what we specify on chimneys with offsets or height that would make rigid pipe a fight, and we’re familiar with how the liner seats at the top plate and the appliance collar. HeatShield resurfacing is a specialty of ours for flues that need restoration rather than full replacement, and we know where the material holds up and where it doesn’t. Gelco caps and top-of-chimney components round out the work we do, so the top is protected as well as the flue.

We don’t claim to be a dealer for any of these brands. What we do claim is that we’ve worked with them enough to know their failure points, and whether you have a DuraFlex liner, Copperfield cap, HeatShield-restored flue, Gelco component, or any other make, we can help. If you’re not sure what’s installed on your chimney, that’s fine. We’ll find out during the inspection and show you the photos.

Signs You Need a Pro Right Now

• Smoke rolling into the room. A fireplace that used to draw well and now doesn’t usually points to a blocked flue or a damaged liner. Neither clears up on its own, and burning in that condition pushes carbon monoxide into the living space.
• Water stains on the ceiling or chimney chase. Stains near the chimney mean water is getting past the flashing or crown. Small leaks turn into rotted framing and crumbling masonry over a season or two, so they’re worth diagnosing early.
• Crumbling mortar or brick grit in the firebox. Sandy grit on the roof or floor of the firebox is the first sign of spalling brick. It usually gets worse through the winter freeze-thaw, not better.
• A cracked or missing cap. A cap that rusted through or blew off leaves the flue open to rain and animals. Nesting debris narrows the flue and becomes a fire hazard when it dries.
• Creosote buildup that’s gone past soot. Glazed, tar-like creosote at the top of the firebox is what catches fire. If the flue sounds hollow when tapped or you can see shiny buildup, get it checked before the next fire.

Our Process, Step by Step

1. 1
   Book the visit and confirm what you’re seeing. We ask what you’ve noticed, when it started, and what kind of appliance you burn. That narrows the inspection before anyone gets on the roof. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
2. 2
   Sweep and inspect with a camera. We sweep the flue first so the camera can actually see the liner. A video scan of the flue, plus a look at the crown, cap, flashing, and firebox, tells us what’s damaged and what’s intact.
3. 3
   Show you the findings with photos. You get a photo report of what we found, with each problem pointed out and explained. If something can safely wait, we say so. Nothing gets recommended without a photo to back it up.
4. 4
   Write the estimate before booking. The estimate lists each repair, the materials (DuraFlex, HeatShield, Copperfield, or Gelco as the job calls for), and the price. The written estimate sets the final price, so there’s no drift between quote and invoice.
5. 5
   Complete the repair and confirm it. After the work is done, we check the fix and make sure the flue draws as it should. You get a record of what was done and what to watch for going forward. We turn down work we don’t think you need.

How Much Does Chimney Repair Cost in Murfreesboro?

Our Service Area Near Murfreesboro

We work throughout Murfreesboro and the surrounding towns, including Christiana, Smyrna, La Vergne, Nolensville, Brentwood, Mount Juliet, and Franklin. We also cover chimney repair in Woodbury and chimney repair in Shelbyville. Most visits are scheduled within a day or two, and same-day service is often possible when the problem is urgent. If you’re outside these towns, call and we’ll tell you honestly whether we can get to you. Our chimney repair work covers the full range from a single cap to a liner replacement.

Frequently Asked Questions About Chimney Repair in Murfreesboro

Schedule Your Chimney Repair Service in Murfreesboro Today

A chimney problem left alone gets more expensive with every season of water and freeze-thaw. Call (844) 372-0461 to book a repair visit or a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, a photo report, and a written estimate before any work begins. No obligation, no surprises. We show you what we find, then we fix it.

Written by the team at Goodwin Chimney Sweep.