Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Murfreesboro
If you burn wood in Murfreesboro, your chimney needs a real look, not a quick brush from a truck bed. Most of the homes we work on here have a zero-clearance metal firebox and a flue that hasn’t been opened since the day it went in, which means a proper sweep here is often a first inspection as much as a cleaning. We serve homeowners across Murfreesboro, from the newer subdivisions off Barfield Road and Veterans Parkway to the older brick homes near the downtown square. Our technicians have up to 9 years of experience, and we handle sweep, inspection, and repair under one company so you’re not chasing three different people to get one fireplace safe. Call (844) 372-0461. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Murfreesboro Homeowners Call Goodwin Chimney Sweep for Chimney Sweep
Most of Murfreesboro’s housing went up in the 1990s and 2000s boom, and prefab factory-built fireplaces came standard in that construction. That single fact changes the work. A traditional masonry sweep is built around brick and flue tile. Much of what we find in Murfreesboro is a metal firebox inside a framed chase, and the problems sit where a basic sweep never looks: a chase blocked off during the build, a firestop never installed, a cap that was never there to begin with.
We show you what we find. When we open a chase or run a camera down a flue in Murfreesboro, you see the photo report before anyone recommends a repair, and we’ll tell you plainly when something can safely wait until next season. We work with the same professional brands chimney contractors specify – DuraFlex, HeatShield, Copperfield, and others – so a repair uses materials built for the trade.
The other half of the Murfreesboro picture is newer buyers and renters. People who just closed on a house here often inherit a chimney system no one has looked at in years, sometimes ever. If you’re in that group, a Level 2 inspection before your first fire is the right place to start.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Certified in Murfreesboro
A Chimney Sweep Certified visit in Murfreesboro starts with getting the flue actually clean and then documenting what’s inside it; for a typical Murfreesboro home that runs $180 to $320 depending on the flue type and how much creosote has built up. The sweep itself removes creosote and soot from the firebox and flue liner. The part that matters more is what we see while the brush is out, because a metal flue that’s never been open is exactly where the surprises live.
What a Standard Sweep Covers
We brush the firebox and flue liner, pull the creosote, and vacuum the surrounding area so nothing drifts through the house. If it’s a wood-burning appliance, we’re checking the firebox joints and the cap at the same time. Nothing gets brushed and left half-finished.
When a Sweep Turns Into an Inspection
If we find a missing cap, a blocked chase, or first-degree creosote that’s starting to glaze, we move into a Level 2 inspection with a camera so you see the condition yourself. That’s the point where we talk repair options and give you a written estimate before anything else happens.
Gas Fireplace Cleaning in Murfreesboro
Gas Fireplace Cleaning in Murfreesboro isn’t just a wipe-down; the burners, logs, and venting need attention because a gas unit still builds up dust, soot, and residue that the eye won’t catch. Most gas fireplace cleanings in Murfreesboro run $150 to $280, and the work usually takes well under two hours. We clean the burner assembly and glass, check that the logs sit where they should, and confirm the vent path is clear.
Why Gas Units Still Need Service
Homeowners assume gas means no maintenance. Dust and burnt residue collect on the burner and in the firebox, and over time the flame pattern shifts. A cleaning with a vent and gas-path check catches that before it becomes a draft problem or a smell that won’t clear.
The Venting Check
On a gas insert, the venting runs through the same chase system as the metal flue. We verify it’s clear and that the termination at the top is intact, which matters most on units whose vent hasn’t been looked at since install.
Trusted Brands We Service in Murfreesboro
We work with the professional brands that chimney contractors specify, not the hardware-store substitutes: DuraFlex and Olympia Chimney for flexible liner work on offset flues, HeatShield for resurfacing a failing liner without pulling the whole thing, and Copperfield and Gelco for caps, covers, and venting components. We don’t stock parts, so nothing sits on a shelf waiting. We assess the flue, order the right component for your system, and schedule the install – which keeps turnaround tight on most repairs. When the right fix is a HeatShield resurfacing instead of a full reline, that path is available to you, and it’s a repair most basic sweep companies can’t offer.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Murfreesboro Homes
- Zero-clearance fireplaces installed against spec. Fast-built subdivisions sometimes went up with the chase blocked or a firestop skipped. A standard masonry sweep won’t find either one, because it’s not looking at the framing around a metal flue.
- Missing caps and open flues. A metal flue with no cap lets rain and animals straight in. That moisture drives corrosion and creates the creosote-draw and mold issues our humid summers make worse in flues that sit unused all season.
- Shared and adjacent flues in attached properties. When a neighbor’s appliance vents into the same stack, exhaust can cross-contaminate your flue. You smell it as odor and see it as corrosion long before anyone thinks to check the connection.
- Freeze-thaw stress on older masonry. The brick homes near downtown have real masonry chimneys, and the freeze-thaw swings we get in Middle Tennessee work on the mortar and the crown year after year. Loose mortar and a cracked crown let water in where flue tiles live.
Pricing for Chimney Sweep in Murfreesboro, TN
A standard sweep in Murfreesboro runs $180 to $320, a Level 1 inspection runs $125 to $225, and a Level 2 camera inspection runs $225 to $400. Gas fireplace cleaning lands at $150 to $280. Creosote removal on a heavier buildup or soot removal on a system that’s been neglected can push the sweep toward the top of that range. What moves the number is flue type, how much creosote is inside, and whether the job needs a camera inspection to settle what’s actually going on. The written estimate sets the final price, and the estimate itself is free. You’ll know the scope and the cost before we book the work.
We Also Serve Cities Near Murfreesboro
We serve homeowners in Murfreesboro and the towns around it: Smyrna, Christiana, La Vergne, and Nolensville. The housing stock shifts as you move out from town, but the metal-flue and shared-stack issues follow the same construction patterns. If you’re just outside Murfreesboro and not sure whether we cover your street, call and we’ll tell you straight.
Whether you’re in Murfreesboro near the square or out toward Christiana, our chimney sweep team handles the sweep, the inspection, and the repair under one company. You can read more about how we work across Murfreesboro on our city page.
Serving Murfreesboro, TN – Our Local Coverage Area
We serve Murfreesboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Murfreesboro
Because the building boom here put prefab zero-clearance fireplaces into thousands of homes and most were never opened up after install. Many went in with a missing cap, a blocked chase, or no firestop, and those faults sit behind the framing where a standard masonry sweep never looks. A Level 2 inspection with a camera is what surfaces them.
Our hot, humid summers drive moisture and creosote-draw problems, especially in flues that sit unused between burning seasons. Moisture combines with creosote residue and the combination is harder to remove and more corrosive to a metal flue. That’s the reason a fall sweep matters here before you light the first fire.
Have both sides inspected, because cross-contamination from a shared stack shows up as odors and corrosion before it becomes a draft failure. A camera inspection confirms whether the two appliances vent into the same path or just run adjacent, and that changes what the fix is. Call (844) 372-0461 to set up the inspection – estimates are free.
A cap is the one thing keeping rain, animals, and debris out of a metal flue, and prefab fireplaces here often went in without one. Without a cap, water enters the flue and drives corrosion, and the humid summer air makes the damage worse. Copperfield and Gelco caps fit most of the metal flues we see here.
Once a year if you burn wood regularly, and once before your first fire in a home you just bought here. Given how much of the local housing stock has a never-opened metal flue, that first inspection is the one that matters most. The written estimate follows the inspection, and it’s free.
Ready to get your Murfreesboro chimney checked? Call (844) 372-0461 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Sweep, inspection, and repair under one company, with a photo report so you can see exactly what we found.
Written by the team at Goodwin Chimney Sweep.