Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Murfreesboro?
Most fireplace services in Murfreesboro run $89 to $650 depending on what the job actually needs. A standard chimney sweep with a Level 1 inspection typically lands between $179 and $289, while a Level 2 camera inspection runs $250 to $450 and a stainless liner installation runs $2,800 to $6,500. Those ranges reflect what we see quoted across Rutherford County for 2026, and the written estimate you get after we look at your flue sets the final price.
Fireplace work isn’t one price because it isn’t one job. A gas insert that needs a sweep and a cap is a very different visit from a 1950s masonry fireplace with a cracked crown and a flue that won’t pass inspection. Below we break down the real line items, what pushes a Murfreesboro job up or down, and where money can be saved without cutting corners on fire safety.
Key Takeaways
- A chimney sweep plus Level 1 inspection in Murfreesboro is typically $179 – $289.
- Level 2 camera inspections run $250 – $450 and are the ones that catch hidden flue damage.
- HeatShield resurfacing ($1,200 – $2,400) restores a damaged liner at a fraction of full liner replacement.
- Stainless liner installation, the big-ticket item, runs $2,800 – $6,500 depending on length and flue configuration.
- Estimates are free, and the written estimate sets the final price on every job.
Fireplace Services Cost Breakdown (2026)
These are the typical ranges for fireplace and chimney work in the Murfreesboro market. Every job is priced per job by a written estimate, so treat these as a planning guide rather than a quote.
| Service | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney sweep (wood-burning) | $179 – $289 | Creosote removal from flue, firebox cleanup |
| Level 1 inspection | $89 – $150 | Visual check of accessible flue, firebox, damper |
| Level 2 camera inspection | $250 – $450 | Video scan of full flue, often paired with a sweep |
| Chimney cap installation | $150 – $450 | Stainless or copper cap sized to the flue |
| Damper repair or replacement | $150 – $500 | Top-seal or throat damper work |
| Crown repair | $350 – $1,200 | Crack sealing up to full crown rebuild |
| HeatShield resurfacing | $1,200 – $2,400 | Liner restoration without full replacement |
| Stainless liner installation | $2,800 – $6,500 | DuraFlex or Olympia flexible liner, insulated |
| Masonry tuckpointing | $500 – $2,000 | Repointing mortar joints on the chimney exterior |
| Gas insert service and venting check | $150 – $350 | Venting verification, log and burner cleanup |
What drives the number up or down is mostly the condition of the flue and the configuration of the chimney. A straight, accessible flue is quick work. An offset flue in an older home, a chase that runs through an interior wall, or a liner that has to be installed around a bend takes longer and costs more. The materials matter too: we use the same brands professional chimney contractors specify – DuraFlex liners, HeatShield resurfacing, Copperfield components – because hardware-store substitutes don’t hold up to a wood fire over the long run. The written estimate accounts for all of it before any work starts.
What Affects Fireplace Services Pricing in Murfreesboro
Murfreesboro sits in a part of Middle Tennessee where homes range from new construction in the fast-growing subdivisions off the Interstate 24 corridor to older brick homes near the downtown square, and that mix shapes what a fireplace job actually costs.
- Flue configuration and accessibility. Straight flues are the easy ones. Offsets, interior chases, and flues that require a flexible liner to follow a bend take more time and more material, which pushes cost toward the top of the range.
- Level of inspection needed. A Level 1 visual check is inexpensive and often bundles with a sweep. If you’re buying a home, have had a chimney fire, or the flue has never been scanned, a Level 2 camera inspection is the right call and costs more because it’s more thorough.
- Creosote condition. Light, fluffy creosote sweeps out fast. Glazed, tar-like creosote from a long stretch of smoldering, low-efficiency fires is harder to remove and can push a sweep toward the higher end of the range.
- Liner condition and material. A clay flue with hairline cracks may only need HeatShield resurfacing. A flue with missing tiles or gaps that won’t pass inspection needs a full stainless liner, which is the biggest line item on the table.
- Crown and cap condition. The top of the chimney takes the weather. A cracked crown lets water in, and a missing or damaged cap invites rain, birds, and debris down the flue. Catching these early keeps a repair small.
- Wood-burning versus gas. Gas inserts and fireplaces need venting verification and burner cleanup, which is a lighter job than wood-burning sweep and creosote work. Mixing up the two is one reason a cheap quote from a generalist can go sideways.
Our technicians have up to 9 years of experience reading these conditions, and we show you what we find. An inspection isn’t an upsell opportunity here: it’s a documented assessment of what the flue and chimney actually need, in plain language, before you decide anything.
How to Save on Fireplace Services
The smartest way to keep fireplace costs down in Murfreesboro is to deal with small problems before they become structural ones. A $150 cap today is cheaper than a crown rebuild after two wet winters. Beyond timing, a few practical moves help:
- Bundle the sweep with the inspection. A sweep and Level 1 inspection done in one visit usually costs less than booking them separately, and most homes only need the sweep plus a visual check.
- Ask whether resurfacing fits before assuming replacement. HeatShield resurfacing is a repair path many basic sweep companies can’t offer. When the flue qualifies, it restores the liner at a fraction of the cost of a full stainless install.
- Keep up with annual sweeps. Regular sweeping keeps creosote from glazing, which keeps the sweep itself in the lower part of the range and prevents the kind of buildup that leads to a chimney fire.
- Fix the top of the chimney early. A cap, a damper that seals, and sound mortar all protect the flue from the inside out. The Gelco and Famco caps and venting components we work with are built for the job, not improvised.
- Get the free estimate in writing. A written estimate locks the scope and price before work starts. Call (844) 372-0461 and the estimate is free.
One thing worth saying plainly: a suspiciously cheap sweep is often a sweep that skips the inspection or finds a problem it can’t fix. If a quote looks too low to cover real work, ask what’s included. We handle sweep, inspection, and repair under one company, so there’s no referral runaround when the inspection turns up a liner or crown that needs attention.
Why Fireplace Work Is Priced the Way It Is
Fireplace services cost what they do because the work is part maintenance, part diagnostics, and part structural repair, and each of those is a different skill. A sweep removes creosote. An inspection reads the flue, the crown, the cap, the damper, and the firebox to find what the eye can’t. Repair addresses whatever the inspection flags, using materials rated for the temperatures and conditions a flue actually sees.
That last part is where the brands matter. DuraFlex and Olympia Chimney flexible liners are made to handle the heat and the offset flues older homes throw at them. HeatShield resurfacing restores a liner from the inside out without tearing the whole thing out. Copperfield components, along with Gelco and Famco caps and venting, make sure the top of the chimney is protected as well as the flue. When a company works with these product lines, the repair is built for the trade, not patched together with whatever the hardware store had on the shelf.
For homeowners in Murfreesboro, that continuity matters. From the first sweep to the finished repair, you deal with one crew that already knows the condition of your flue. There’s no handoff, no second company to vet, and no gap between “we found a problem” and “we can fix it.” That’s a big part of why the price on the estimate is the price you pay, with no surprise add-ons when the repair begins.
Fireplace Services in Murfreesboro: Where to Start
If you’re not sure what your fireplace needs, start with a sweep and an inspection. That tells you the condition of the flue, the crown, the cap, and the damper, and it gives you a documented picture of any repair work that’s actually needed. Most Murfreesboro homes with an active fireplace benefit from an annual sweep to keep creosote in check and catch small issues before they spread. If you’ve moved into a home with a fireplace you haven’t used, or you’ve had a chimney fire, a Level 2 camera inspection is the more thorough starting point.
From there, the work is scoped and priced. If it’s routine, the visit is quick. If there’s a liner or crown to address, we walk you through the options, including whether resurfacing fits before replacement is on the table. You can read more about our service area on the Murfreesboro page, or get the full picture of what we do at Goodwin Chimney Sweep.
Safety First: When to Call a Professional
Some parts of fireplace and chimney work are genuinely dangerous to handle yourself. Creosote is highly flammable, and glazed creosote can ignite from a stray spark. Climbing onto a roof to inspect a crown or cap risks a fall. And any work inside the flue, especially around a damaged liner or a firebox that may have cracks, should be done by a trained professional who knows what to look for. If your damper sticks, your fire smokes into the room, or you smell a strong creosote odor, that’s a signal to stop burning and get the flue checked before the next fire.
A clean flue isn’t just maintenance: it’s the difference between a good fire and a house fire. We’d rather tell you what we find and let you decide than have you find out the hard way.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Murfreesboro?
A chimney sweep in Murfreesboro typically costs $179 – $289, and that usually includes a Level 1 visual inspection. Call (844) 372-0461 for an exact quote: estimates are free.
How much does a chimney inspection cost in Murfreesboro?
A Level 1 inspection runs $89 – $150, while a Level 2 camera inspection runs $250 – $450. If you’re buying a home or haven’t had the flue scanned, the Level 2 is worth the extra. Call (844) 372-0461 for a free estimate.
How much does chimney repair cost in Murfreesboro?
Chimney repair costs vary by scope: a cap runs $150 – $450, crown repair $350 – $1,200, HeatShield resurfacing $1,200 – $2,400, and a full stainless liner $2,800 – $6,500. The written estimate sets the final price. Call (844) 372-0461 to get one.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the flue qualifies: HeatShield resurfacing at $1,200 – $2,400 typically costs less than a full stainless liner at $2,800 – $6,500. We tell you which your flue actually needs after the inspection. Call (844) 372-0461 for a free estimate.
Can you come today?
Same-day service is often possible in Murfreesboro. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 372-0461 and we’ll book you into the next available opening.
Get a Free Fireplace Estimate in Murfreesboro
Whether it’s a routine sweep, a camera inspection, or a liner that needs attention before the next burn season, the first step is the same: a look at the flue. Goodwin Chimney Sweep handles sweeping, inspection, and repair under one company, using the professional brands the trade specifies. Call (844) 372-0461 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, with written pricing before any work starts.
Pricing reflects the Murfreesboro market as of 2026. Goodwin Chimney Sweep offers free estimates – call (844) 372-0461.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eric Ackerman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Alicia Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rosa Vargas