Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Murfreesboro?
A chimney cap installation in Murfreesboro typically runs $175 to $450, and crown repair usually falls between $300 and $750. A full crown rebuild, where the old crown is removed and recast, runs $600 to $1,400. These are estimated ranges for the Murfreesboro market in 2026; your written estimate sets the final price.
We’re Goodwin Chimney Sweep, and the top of the chimney is the part most homeowners never see. A cap and a crown are two different pieces working together: the cap keeps water, birds and debris out of the flue, and the crown is the concrete slope that sheds water off the brick. When either one fails, water gets into the masonry and the damage moves downward fast. You can see our full range of work on the Goodwin Chimney Sweep home page, and this guide walks through what cap and crown work actually costs here.
Key Takeaways
- Cap installation: $175 to $450, depending on cap style, flue count and material.
- Crown repair (cracks, small breaks): $300 to $750.
- Full crown rebuild: $600 to $1,400.
- Most jobs are quoted per chimney, not by the hour, and the written estimate is the final word.
- Catching a cracked crown early is the single cheapest way to protect the masonry below it.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the numbers break down for a typical Murfreesboro home. Costs climb with chimney height, the number of flues, and how much of the crown has actually failed.
| Line item | Typical estimated range |
|---|---|
| Single-flue cap installation (standard metal) | $175 – $300 |
| Multi-flue cap installation | $300 – $450 |
| Custom or oversized cap | $400 – $700 |
| Crown crack repair and sealing | $300 – $550 |
| Partial crown rebuild | $450 – $750 |
| Full crown rebuild (remove and recast) | $600 – $1,400 |
| Crown wash and waterproofing (added) | $150 – $400 |
| Inspection to confirm scope | Free estimate |
What pushes a job toward the top of those ranges? A tall chimney means more staging and more time at height. Two or three flues on one stack mean a bigger, custom-fit cap. A crown that has pulled away from the flue entirely is a rebuild, not a repair. And if water has already worked into the brick below the crown, sealing the crown alone won’t fix it, so the scope grows.
What keeps a job at the low end? Catching a hairline crack in the crown before it widens, or capping a single-flue chimney with a standard stock cap. Both are quick jobs with standard parts.
What Affects Chimney Cap & Crown Pricing in Murfreesboro
Pricing here isn’t arbitrary. A few local and structural factors move the number up or down more than anything else.
- Chimney height and roof pitch. Murfreesboro has a lot of one- and two-story brick homes, and a steep roof or a tall stack means more careful setup at height. That shows up in the labor side of the estimate.
- Number of flues. A fireplace chimney and a furnace flue on the same stack need a single multi-flue cap or two separate caps, and both cost more than one.
- Crown condition. A surface crack is a repair. A crown that’s crumbled, separated from the flue, or missing large sections is a rebuild, and that’s the biggest single swing in price.
- Material for the cap. Standard galvanized steel is the low end. Stainless steel and custom-fit copper caps cost more but hold up longer, and we work with Copperfield and Gelco caps matched to your flue.
- Masonry condition below the crown. If water got into the brick, the crown work may need to include spot repairs or a waterproofing treatment. The cap and crown protect the flue, but the brick has to be sound for any of it to last.
- Whether you’re already having other work done. If you’re booking a sweep and inspection, the crew is already on the roof, which can trim the total. Call (844) 372-0461 to talk through what’s needed.
How to Save on Chimney Cap & Crown
The best savings here come from timing, not from hunting for the lowest bid. A cap and crown are structural, and a cheap install that fails in a few years costs more than doing it right once.
- Fix the crown before the brick fails. A $300 to $550 crack repair now beats a masonry rebuild later. Water finds the crack and works down into the mortar joints, and that repair is far more involved.
- Combine the cap with a sweep or inspection. If you’re due for a cleaning or an inspection anyway, adding a cap while the crew has the roof set up keeps the labor in one visit.
- Choose the cap for the flue, not the cheapest box. A cap sized wrong for your flue lets water in or blocks draft. Matching it to the flue the first time avoids pulling it off and starting over.
- Get a free estimate before anything is ordered. Our estimates are free, and we show you what we find so you’re deciding on the actual condition of your chimney, not a sales pitch. There’s never a fee to get the number.
- Ask about waterproofing while the crown is open. Sealing the brick around a fresh crown is a modest add and protects the work you just paid for.
We use the same brands professional chimney contractors specify, including Copperfield and Gelco for caps and HeatShield for crown and flue resurfacing, so the parts and the work are built to last. If you’re not sure whether your chimney needs a cap, a crown, or both, that’s what the free estimate sorts out.
Cap or Crown? Knowing Which You Need
Homeowners often use these two terms interchangeably, but they’re different pieces. The cap sits on top of the flue and keeps rain, animals and debris out. The crown is the concrete or mortar slope at the very top of the chimney that sheds water off the brick. A missing or damaged cap lets water into the flue. A cracked crown lets water into the masonry. Both lead to water damage, but they’re fixed differently.
If your cap is missing or bent, that’s a straightforward replacement. If the crown is cracked, it needs sealing or resurfacing, and if it’s badly broken, a rebuild. When we inspect the top of the chimney, we look at both together because one failing often stresses the other.
Why Chimney Caps and Crowns Matter More Than They Look
A cap is the cheapest insurance on the whole chimney. Without one, rain runs straight down the flue, and birds, squirrels and debris set up house. Water that sits in a flue rusts a metal liner and weakens a clay one. A functioning cap also keeps sparks off your roof. The crown is the roof of the chimney itself, and when it cracks, water gets behind the brick and into the mortar, where freeze and thaw cycles over Middle Tennessee winters work it apart.
That’s why we treat this as more than a cosmetic repair. A clean, well-drained flue is the difference between a good fire and a house fire, and water getting into the masonry undermines the whole structure. Spending a few hundred dollars on the top now is what protects the chimney for years.
What a Cap and Crown Job Involves
Understanding the steps helps you read an estimate and know what you’re paying for. Here’s what a typical job looks like from start to finish.
- Inspection of the crown and flue. We look at the crown, the flashing, the flue tiles and the cap area, and we document what we find with photos.
- Fixing the crown first. Cracks get cleaned and sealed or resurfaced, or the crown is rebuilt if it’s failed. The crown has to be sound before a cap goes on.
- Measuring the flue. The cap is sized to the flue, not guessed. A multi-flue stack gets a custom-fit cap.
- Installing the cap. The cap is set and secured so wind and weather don’t move it, with the spark screen in place.
- Waterproofing where needed. We treat the brick around the crown to keep water from soaking in.
Most cap and crown jobs are done in a single visit. You’ll get a written estimate up front so you know the price before anything starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so you can book at a time that works for you.
Pricing for Murfreesboro Homes Specifically
Murfreesboro’s housing stock shapes what these jobs cost. The city has a lot of traditional brick masonry chimneys on homes across neighborhoods like Blackman, Siegel, and the older streets near the Public Square, where original chimneys may be several decades old. Older masonry often means the crown has taken years of weather and is more likely to need a rebuild rather than a simple seal. The brick itself may have settled or the mortar may be soft, which can add waterproofing or spot repairs to the scope.
Middle Tennessee’s swing between hot, wet summers and freezing winters is hard on crowns. Water gets into a small crack, freezes, and widens it, so a crown that looks minor in summer can be a real leak by January. That pattern is why we check the crown closely whenever the crew is up top, even for a routine sweep or inspection.
Different home styles also change the picture. A ranch with a single fireplace chimney is one job. A larger two-story home with a wood-burning stove or gas insert, or a chimney shared with a furnace flue, needs a multi-flue cap and costs more. We see the full range across Murfreesboro, and the estimate reflects your actual chimney, not a one-price-fits-all package.
Why Choose Goodwin Chimney Sweep for Cap and Crown Work
We handle chimney sweeping, chimney inspection and chimney repair under one company. That matters here because a cap and crown job often starts as a sweep or inspection and turns into a repair. You won’t get a sweep company that finds a cracked crown and can’t fix it, or sends you to find someone else. From the first sweep to the finished repair, you deal with one crew.
We work with professional-grade chimney brands: DuraFlex and Olympia Chimney for liners and flue work, HeatShield for resurfacing, and Gelco, Famco and Copperfield for caps and venting. Those are the same brands professional chimney contractors specify, not hardware-store substitutes. Our technicians have up to 9 years of experience, and we show you what we find so you can make a decision based on the real condition of your chimney.
When the crown needs resurfacing rather than a full rebuild, HeatShield gives us a repair path that keeps you from paying for a complete replacement. When a cap needs a custom fit, we match the material and size to your flue. That continuity is what separates a full-service chimney specialist from a sweep-only operator.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Murfreesboro?
A standard single-flue cap in Murfreesboro runs $175 to $300, and a multi-flue or custom cap runs $300 to $700. Stainless and copper caps sit at the higher end and last longer. Call (844) 372-0461 for an exact quote – estimates are free.
How much does it cost to repair a chimney crown?
Crown repair typically costs $300 to $550 for cracks and small breaks, and a full crown rebuild runs $600 to $1,400. The number depends on how much of the crown has failed. Call (844) 372-0461 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney crown?
Repair is almost always cheaper when the crown is cracked but still attached – often $300 to $550 versus $600 to $1,400 for a rebuild. A crown that has separated from the flue or crumbled needs a rebuild. An inspection tells you which one you’re facing, and the free estimate puts a number on it. Call (844) 372-0461 to book one.
Can you install a chimney cap the same day?
Yes, a standard cap installation can usually be done the same day once we’ve confirmed the flue size and condition, with pricing starting around $175. Call (844) 372-0461. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why does my chimney crown keep cracking in Murfreesboro?
Repeated cracking usually comes from water getting into small cracks and freezing over Middle Tennessee winters, which widens them each season. A crown that isn’t properly sloped or sealed will keep cracking, so the fix is to repair and waterproof rather than just patch. Call (844) 372-0461 to have it looked at – estimates are free.
Do I need a cap and a crown, or just one?
Most chimneys need both, and they do different jobs – the cap keeps water and animals out of the flue, and the crown sheds water off the brick. A typical combined job with a standard cap and a crown seal runs $475 to $850. Call (844) 372-0461 and we’ll tell you what your chimney actually needs.
Call (844) 372-0461 for a free estimate on your chimney cap or crown. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll show you what we find and give you the written number before any work starts.
Pricing reflects the Murfreesboro market as of 2026. Goodwin Chimney Sweep offers free estimates – call (844) 372-0461.
Written by the team at Goodwin Chimney Sweep.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eric Ackerman"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Alicia Dawson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rosa Vargas