Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Murfreesboro, TN
We provide independent DuraFlex service across Murfreesboro. What sets our work apart here is a specific reality of this town’s housing: a large share of DuraFlex zero-clearance systems were installed through the 1990s and 2000s building boom, and many have never had a professional inspection since the day they went in. We know these assemblies and their flue components from daily field work, not from any factory endorsement. To book a visit, call (844) 372-0461; we’ll look your system over and show you exactly what we find.
Why Murfreesboro Residents Choose Us for DuraFlex Service
We’re an independent shop, which matters most when something needs answering without a sales pitch attached. Our technicians have up to 9 years of experience working with DuraFlex liners and zero-clearance fireplace venting, and we use quality parts that fit the system already in your home.
Murfreesboro’s mix of housing shapes what we do. Newer subdivisions off the main corridors have prefab fireplaces with metal flues; older brick homes nearer downtown and in established neighborhoods carry true masonry chimneys that need mortar and flue-tile attention. Both show up on our schedule. We handle sweep, inspection, and repair under one company, so when the camera turns up a problem, you aren’t sent hunting for a second contractor who can actually fix it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Murfreesboro
- Missing or loosely sealed top plates and caps. During the boom years, plenty of DuraFlex liners went in without a proper top plate or cap. Rain gets down the flue, the stainless liner starts to rust through, and by the time anyone notices, the damage is structural rather than cosmetic.
- Compromised firestop spacers and blocked chases. Zero-clearance installations depend on a clear chase and intact firestops to draft correctly. When chase blocking is stuffed in or a firestop is missing, creosote collects out of sight and draft falls off quietly over years of use.
- Gasket and joint failures at liner sections. Repeated heating and cooling cycles work at every joint in a DuraFlex liner. Failed gaskets let smoke leak at connections and cut efficiency without ever setting off a smoke alarm in the living room.
- Corrosion at the liner-to-appliance connection. Murfreesboro’s hot, humid summers leave flues sitting unused for months. Without a cap, moisture settles at the appliance connection, and that’s where the corrosion begins.
- Creosote buildup in metal flues that never got inspected. Many of these systems look fine from the hearth and haven’t been opened up since install. Creosote hides in the chase where only a camera reaches it.
DuraFlex Service in Murfreesboro: What Local Conditions Mean for Your Equipment
Here’s the local insight that shapes most of our DuraFlex calls: because so many zero-clearance fireplaces in Murfreesboro went in during the 1990s and 2000s building boom, a large share of them have never been professionally inspected since the home was built. Walk through a fast-built subdivision and you’ll find metal flues with no cap and missing firestops that never show up on a traditional masonry sweep. That changes the job. A homeowner calls for a routine cleaning and learns the bigger issue is a firestop gap or a blocked chase, not the flue interior alone. In Murfreesboro’s newer subdivisions, a homeowner typically books a sweep only to learn the DuraFlex zero-clearance firebox has a metal flue with no cap and a missing firestop, conditions invisible from the room. A qualified local tech runs a Level 2 inspection with a camera, confirms liner integrity and clearances, then installs a proper cap and firestop and clears any creosote in the chase. Because these systems are factory-built and often uninspected since installation, the fix usually stays at the component level: cap, firestop, joint seals. Not a full rebuild.
DuraFlex Models & Products We Service in Murfreesboro
The DuraFlex work we handle in Murfreesboro spans 316L stainless steel flexible chimney liner kits and 304L alloy liner systems for wood-burning inserts, along with zero-clearance fireplace venting components (direct-vent and B-vent) and chimney cap and top-plate assemblies. We repair, install, and service these systems with quality parts that fit them – OEM DuraFlex components whenever they’re available, so the system’s listed clearances and performance stay intact. For non-critical accessories like caps and clamps, quality aftermarket parts are fine. We don’t manufacture, authorize, or dealer for DuraFlex; we’re an independent specialist that works on the brand daily.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Murfreesboro
Pricing is set per job by a written estimate, and the estimate itself is free. Several things drive the number: whether the inspection finds a missing cap or firestop, how much creosote has built up in the chase, whether a liner joint needs resealing, and whether the job needs any component-level replacement. Repair is usually the right call when the liner integrity and clearances check out – replacement comes up only for corroded, crushed, or improperly sized DuraFlex systems. Nothing gets recommended that you haven’t seen on camera yourself, and we’ll tell you plainly when work can safely wait. Call (844) 372-0461 for your free estimate.
Serving Murfreesboro, TN – Our Local Coverage Area
We serve Murfreesboro and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Murfreesboro
Look at the firebox: a zero-clearance unit is a metal box with venting, often behind a factory surround, while a masonry chimney is brick or stone with a clay flue. In Murfreesboro’s 1990s – 2000s subdivisions, the prefab metal version is what you’ll usually see. If you’re unsure, a Level 2 inspection settles it – call (844) 372-0461.
A smoky smell with no fire going usually points to a failed gasket or joint seal, or to moisture entering through a missing or unsealed cap. Humid summers here make that worse on an unused flue. The fix is component-level: reseal the joints, install a proper cap, clear any creosote in the chase.
Usually, yes. When the liner integrity and clearances remain sound, we repair rather than replace – new caps, firestops, clamps, and joint seals handle most of what we find. Replacement is only recommended for corroded, crushed, or improperly sized DuraFlex systems. Let us look before you assume the worst.
Once a year with regular use. Here it matters more than in many places, because so many of these systems were installed without a cap or firestop and have never been opened up. An annual Level 2 inspection with a camera catches those gaps early. Call (844) 372-0461 to book.
A firestop is the spacer that seals where the flue passes through floors or walls, blocking fire from spreading and keeping the chase clear for draft. Missing firestops are one of the most common defects we find in Murfreesboro’s fast-built subdivisions. It’s a small component with big consequences – and a quick fix once we spot it.
It’s set per job by the written estimate, and the estimate is free. Fitting a missing cap or firestop, resealing joints, and clearing chase creosote each carry their own cost depending on the system. Call (844) 372-0461 for an exact quote – estimates are free.
Service Areas Near Murfreesboro
Beyond Murfreesboro itself, we handle DuraFlex work in Christiana to the south, Smyrna and La Vergne to the north, and Woodbury and Shelbyville deeper into the surrounding counties. Same independent DuraFlex specialty, same camera-based inspection, wherever you are. See more about Murfreesboro coverage or read our full DuraFlex service details.
Book Your DuraFlex Service in Murfreesboro Today
If your zero-clearance fireplace hasn’t been opened up in years, a camera inspection will tell you whether anything’s actually wrong. We’ll show you what we find and tell you when it can safely wait. Call (844) 372-0461 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Goodwin Chimney Sweep.